×

74AVC16T245EV

16-bit dual supply translating transceiver with configurable voltage translation; 3-state

The 74AVC16T245 is a 16-bit transceiver with bidirectional level voltage translation and 3-state outputs.The device can be used as two 8-bit transceivers or as a 16-bit transceiver. It has dual supplies (VCC(A) and VCC(B)) for voltage translation and four 8-bit input-output ports (nAn and nBn) each with its own output enable (nOE) and send/receive (nDIR) input for direction control. VCC(A) and VCC(B) can be independently supplied at any voltage between 0.8 V and 3.6 V making the device suitable for low voltage translation between any of the following voltages: 0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V. A HIGH on nDIR selects transmission from nAn to nBn while a LOW on nDIR selects transmission from nBn to nAn. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state

The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both nAn and nBn are in the high-impedance OFF-state.

This product has been discontinued, click here for discontinuation information and replacement parts.

Features and benefits

  • Wide supply voltage range:

    • VCC(A): 0.8 V to 3.6 V

    • VCC(B): 0.8 V to 3.6 V

  • Complies with JEDEC standards:

    • JESD8-12 (0.8 V to 1.3 V)

    • JESD8-11 (0.9 V to 1.65 V)

    • JESD8-7 (1.2 V to 1.95 V)

    • JESD8-5 (1.8 V to 2.7 V)

    • JESD8-B (2.7 V to 3.6 V)

  • ESD protection:

    • HBM JESD22-A114F Class 3B exceeds 8000 V

    • MM JESD22-A115-A exceeds 200 V

    • CDM JESD22-C101D exceeds 1000 V

  • Maximum data rates:

    • 380 Mbit/s (≥ 1.8 V to 3.3 V translation)

    • 200 Mbit/s (≥ 1.1 V to 3.3 V translation)

    • 200 Mbit/s (≥ 1.1 V to 2.5 V translation)

    • 200 Mbit/s (≥ 1.1 V to 1.8 V translation)

    • 150 Mbit/s (≥ 1.1 V to 1.5 V translation)

    • 100 Mbit/s (≥ 1.1 V to 1.2 V translation)

  • Suspend mode

  • Latch-up performance exceeds 100 mA per JESD 78 Class II

  • Inputs accept voltages up to 3.6 V

  • IOFF circuitry provides partial Power-down mode operation

  • Multiple package options

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Applications

Parametrics

Type number Product status Package name
74AVC16T245EV End of life VFBGA56

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74AVC16T245EV 74AVC16T245EVY
(935288136518)
Obsolete AVC16T245 no package information
74AVC16T245EV,551
(935288136551)
Obsolete AVC16T245
74AVC16T245EV,557
(935288136557)
Obsolete AVC16T245

Environmental information

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number Chemical content RoHS RHF-indicator
74AVC16T245EV 74AVC16T245EVY 74AVC16T245EV rhf
74AVC16T245EV 74AVC16T245EV,551 74AVC16T245EV rhf
74AVC16T245EV 74AVC16T245EV,557 74AVC16T245EV rhf
Quality and reliability disclaimer

Documentation (4)

File name Title Type Date
74AVC16T245 16-bit dual supply translating transceiver with configurable voltage translation; 3-state Data sheet 2019-01-14
AN90007 Pin FMEA for AVC family Application note 2018-11-30
Nexperia_document_guide_Logic_translators Nexperia Logic Translators Brochure 2021-04-12
avc16t245 AVC16T245 IBIS model IBIS model 2013-05-05

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
avc16t245 AVC16T245 IBIS model IBIS model 2013-05-05

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.