Nexperia
Or cross multiple parts
×

74AVC2T45GD

Dual-bit, dual-supply voltage level translator/transceiver; 3-state

The 74AVC2T45 is a dual-bit, dual-supply transceiver that enables bidirectional level translation. It features two data input-output ports (nA and nB), a direction control input (DIR) and dual-supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins nA and DIR are referenced to VCC(A) and pins nB are referenced to VCC(B). A HIGH on DIR allows transmission from nA to nB and a LOW on DIR allows transmission from nB to nA.

The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In Suspend mode when either VCC(A) or VCC(B) are at GND level, both A and B are in the high-impedance OFF-state.

This product has been discontinued, click here for discontinuation information and replacement parts.

Alternatives

Features and benefits

  • Wide supply voltage range:

    • VCC(A): 0.8 V to 3.6 V

    • VCC(B): 0.8 V to 3.6 V

  • High noise immunity

  • Complies with JEDEC standards:

    • JESD8-12 (0.8 V to 1.3 V)

    • JESD8-11 (0.9 V to 1.65 V)

    • JESD8-7 (1.2 V to 1.95 V)

    • JESD8-5 (1.8 V to 2.7 V)

    • JESD8-B (2.7 V to 3.6 V)

  • ESD protection:

    • HBM JESD22-A114F Class 3B exceeds 8000 V

    • MM JESD22-A115-A exceeds 200 V

    • CDM JESD22-C101C exceeds 1000 V

  • Maximum data rates:

    • 500 Mbit/s (1.8 V to 3.3 V translation)

    • 320 Mbit/s (<1.8 V to 3.3 V translation)

    • 320 Mbit/s (translate to 2.5 V or 1.8 V)

    • 280 Mbit/s (translate to 1.5 V)

    • 240 Mbit/s (translate to 1.2 V)

  • Suspend mode

  • Latch-up performance exceeds 100 mA per JESD 78 Class II

  • Inputs accept voltages up to 3.6 V

  • Low noise overshoot and undershoot < 10 % of VCC

  • IOFF circuitry provides partial Power-down mode operation

  • Multiple package options

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type number Product status Package name
74AVC2T45GD End of life XSON8

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74AVC2T45GD 74AVC2T45GD,125
(935286845125)		 Obsolete B45 According NX3-00133 According NX3-00133 SOT996-2
XSON8
(SOT996-2) 		SOT996-2 SOT996-2_125

Environmental information

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number Chemical content RoHS RHF-indicator
74AVC2T45GD 74AVC2T45GD,125 74AVC2T45GD rohs rhf rhf
Quality and reliability disclaimer

Series

Documentation (7)

File name Title Type Date
74AVC2T45 Dual-bit, dual-supply voltage level translator/transceiver; 3-state Data sheet 2021-11-04
AN10161 PicoGate Logic footprints Application note 2002-10-29
AN90007 Pin FMEA for AVC family Application note 2018-11-30
Nexperia_document_guide_Logic_translators Nexperia Logic Translators Brochure 2021-04-12
avc2t45 74AVC2T45 IBIS model IBIS model 2022-12-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT996-2 plastic, leadless extremely thin small outline package; 8 terminals; 0.5 mm pitch; 3 mm x 2 mm x 0.5 mm body Package information 2020-04-21

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
avc2t45 74AVC2T45 IBIS model IBIS model 2022-12-22

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet