74LVC1G175-Q100

Single D-type flip-flop with reset; positive-edge trigger

The 74LVC1G175-Q100 is a low-power, low-voltage single positive edge triggered D‑type flip‑flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on the data input is transferred to the Q output on the LOW‑to‑HIGH transition of the clock pulse. The D input must be stable one set-up time prior to the LOW‑to‑HIGH clock transition for predictable operation. The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
  • Wide supply voltage range from 1.65 V to 5.5 V
  • 5 V tolerant inputs for interfacing with 5 V logic
  • High noise immunity
  • Complies with JEDEC standard:
    • JESD8-7 (1.65 V to 1.95 V)
    • JESD8-5 (2.3 V to 2.7 V)
    • JESD8B/JESD36 (2.7 V to 3.6 V)
  • ±24 mA output drive (VCC = 3.0 V)
  • CMOS low power consumption
  • Latch-up performance exceeds 250 mA
  • Direct interface with TTL levels
  • Inputs accept voltages up to 5 V
  • ESD protection:
    • MIL-STD-883, method 3015 exceeds 2000 V
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74LVC1G175GV-Q100Production1.65 - 5.5CMOS/LVTTL+/- 323.1300low-40~12523240.0146TSOP6
74LVC1G175GW-Q100Production1.65 - 5.5CMOS/LVTTL+/- 323.1300low-40~12526539.1154TSSOP6

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74LVC1G175GV-Q100
TSOP6
(SOT457)
SOT457Reel 7" Q3/T4, ReverseActiveV7574LVC1G175GV-Q100H
( 9353 015 06125 )
74LVC1G175GW-Q100
TSSOP6
(SOT363)
SOT363Reel 7" Q3/T4, ReverseActiveYT74LVC1G175GW-Q100H
( 9353 015 07125 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRMSLMSL leadfree
74LVC1G175GV-Q10074LVC1G175GV-Q100H74LVC1G175GV-Q100Always Pb-free123.811
74LVC1G175GW-Q10074LVC1G175GW-Q100H74LVC1G175GW-Q100Always Pb-free123.811
Quality and reliability disclaimer

Documentation (15)

File nameTitleTypeDate
74LVC1G175_Q100Single D-type flip-flop with reset; positive-edge triggerData sheet2017-03-17
75017668Low voltage CMOS family - LVCBrochure2015-07-09
Nexperia-Automotive-Selection-Guide-2018Discretes, logic and MOSFETs AEC-Q100/Q101 qualifiedSelection guide2018-05-29
SOT363_165TSSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-20
SOT363_125Tape reel SMD; reversed product orientation 12NC ending 125Packing2012-11-20
SOT363_135TSSOP6; Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-20
MAR_SOT363MAR_SOT363 TopmarkTop marking2013-06-03
SOT363_115TSSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-15
SOT363plastic, surface-mounted package; 6 leads; 1.3 mm pitch; 2 mm x 1.25 mm x 0.95 mm bodyOutline drawing2018-02-23
MAR_SOT457MAR_SOT457 TopmarkTop marking2013-06-03
SOT457_125Tape reel SMD; reversed product orientation 12NC ending 125Packing2012-11-30
SOT457_115TSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-30
SOT457_135Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-30
SOT457_165TSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-30
SOT457plastic, surface-mounted package (SC-74)Outline drawing2018-05-26

Support

Find answers to your design questions on this page. If available you can find information in our Nexperia Support Community or you can find Nexperia models and Design tools.

Ordering & availability

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.