×

74ALVT162827DL

20-bit buffer/line driver; non-inverting; with 30 Ohm termination resistors; 3-state

The 74ALVT162827 is a 20-bit buffer/line driver with 30 Ω termination resistors and 3-state outputs.

The device can be used as two 10-bit buffers or one 20-bit buffer. The device features output enable (OE1 and OE2) inputs, each controlling 10-bits. A HIGH on either OE1 or OE2 causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external pull-up resistors to define unused inputs.

This product has been discontinued, click here for discontinuation information and replacement parts.

Features and benefits

  • Wide supply voltage range from 2.3 V to 3.6 V

  • Overvoltage tolerant inputs to 5.5 V

  • BiCMOS high speed and output drive

  • Direct interface with TTL levels

  • Bus hold on data inputs

  • No bus current loading when output is tied to 5 V bus

  • Power-up 3-state

  • IOFF circuitry provides partial Power-down mode operation

  • Latch-up performance exceeds 500 mA per JESD 78 Class II Level B

  • ESD protection:
    • HBM EIA/JESD22-A114-A exceeds 2000 V
    • MM EIA/JESD22-A115-A exceeds 200 V
  • Specified from -40 °C to 85 °C

Parametrics

Type number Product status Package name
74ALVT162827DL End of life SSOP56

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74ALVT162827DL 74ALVT162827DL,112
(935210060112)
Obsolete ALVT162827 Standard Procedure Standard Procedure SOT371-1
SSOP56
(SOT371-1)
SOT371-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Not available
74ALVT162827DL,118
(935210060118)
Obsolete ALVT162827 Standard Procedure Standard Procedure Not available
74ALVT162827DL,512
(935210060512)
Obsolete ALVT162827 Standard Procedure Standard Procedure Not available
74ALVT162827DL,518
(935210060518)
Obsolete ALVT162827 Standard Procedure Standard Procedure Not available

Environmental information

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number Chemical content RoHS RHF-indicator
74ALVT162827DL 74ALVT162827DL,112 74ALVT162827DL rhf
74ALVT162827DL 74ALVT162827DL,118 74ALVT162827DL rhf
74ALVT162827DL 74ALVT162827DL,512 74ALVT162827DL rohs rhf rhf
74ALVT162827DL 74ALVT162827DL,518 74ALVT162827DL rohs rhf rhf
Quality and reliability disclaimer

Documentation (7)

File name Title Type Date
74ALVT162827 20-bit buffer/line driver; non-inverting; with 30 Ohm termination resistors; 3-state Data sheet 2018-01-26
alvt162827 alvt162827 IBIS model IBIS model 2013-04-07
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT371-1 plastic, shrink small outline package; 56 leads; 0.635 mm pitch; 18.45 mm x 7.5 mm x 2.8 mm body Package information 2020-04-21
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
alvt16 alvt16 Spice model SPICE model 2013-05-06
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
alvt162827 alvt162827 IBIS model IBIS model 2013-04-07
alvt16 alvt16 Spice model SPICE model 2013-05-06

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.