×

74HCT9046AD

PLL with band gap controlled VCO

The 74HCT9046A. This device features reduced input threshold levels to allow interfacing to TTL logic levels. Inputs also include clamp diodes, this enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

This product has been discontinued, click here for discontinuation information and replacement parts.

Features and benefits

  • Operation power supply voltage range from 4.5 V to 5.5 V

  • Low power consumption

  • Complies with JEDEC standard no. 7A

  • Inhibit control for ON/OFF keying and for low standby power consumption

  • Center frequency up to 17 MHz (typical) at VCC = 5.5 V

  • Choice of two phase comparators:

    • PC1: EXCLUSIVE-OR

    • PC2: Edge-triggered JK flip-flop

  • No dead zone of PC2

  • Charge pump output on PC2, whose current is set by an external resistor Rbias

  • Center frequency tolerance ±10 %

  • Excellent Voltage Controlled Oscillator (VCO) linearity

  • Low frequency drift with supply voltage and temperature variations

  • On-chip band gap reference

  • Glitch free operation of VCO, even at very low frequencies

  • Zero voltage offset due to operational amplifier buffering

  • ESD protection:

    • HBM JESD22-A114F exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

Applications

  • FM modulation and demodulation where a small center frequency tolerance is essential

  • Frequency synthesis and multiplication where a low jitter is required (e.g. video picture-in-picture)

  • Frequency discrimination

  • Tone decoding

  • Data synchronization and conditioning

  • Voltage-to-frequency conversion

  • Motor-speed control

Parametrics

Type number Product status VCC (V) Logic switching levels Output drive capability (mA) tpd (ns) fmax (MHz) Power dissipation considerations Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
74HCT9046AD End of life 4.5 - 5.5 TTL ± 4 23 19 low 67 1.0 25.1 SO16

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74HCT9046AD 74HCT9046AD,112
(935044180112)
Obsolete 74HCT9046AD 74HCT9046AD Standard Procedure Standard Procedure SOT109-1
SO16
(SOT109-1)
SOT109-1 SO-SOJ-REFLOW
SO-SOJ-WAVE
WAVE_BG-BD-1
SOT109-1_112
74HCT9046AD,118
(935044180118)
Obsolete 74HCT9046AD 74HCT9046AD Standard Procedure Standard Procedure SOT109-1_118
74HCT9046AD,699
(935044180699)
Obsolete 74HCT9046AD 74HCT9046AD Standard Procedure Standard Procedure Not available

Environmental information

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number Chemical content RoHS RHF-indicator
74HCT9046AD 74HCT9046AD,112 74HCT9046AD rohs rhf rhf
74HCT9046AD 74HCT9046AD,118 74HCT9046AD rohs rhf rhf
74HCT9046AD 74HCT9046AD,699 74HCT9046AD rohs rhf rhf
Quality and reliability disclaimer

Documentation (10)

File name Title Type Date
74HCT9046A PLL with band gap controlled VCO Data sheet 2020-03-20
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SO16_SOT109-1_mk plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.35 mm body Marcom graphics 2017-01-28
SOT109-1 plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.75 mm body Package information 2023-11-07
SO-SOJ-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
HCT_USER_GUIDE HC/T User Guide User manual 1997-10-31
SO-SOJ-WAVE Footprint for wave soldering Wave soldering 2009-10-08
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name Description

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.