74CBTLV1G125GV

Single bus switch

The 74CBTLV1G125 provides a single high-speed line switch. The switch is disabled when the output enable (OE) input is high.

To ensure the high-impedance OFF-state during power-up or power-down, tie OE to the VCC through a pull-up resistor. The current-sinking capability of the driver determines the minimum value of the resistor.

Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 2.3 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

Features

  • Supply voltage range from 2.3 V to 3.6 V
  • High noise immunity
  • Complies with JEDEC standard:
    • JESD8-5 (2.3 V to 2.7 V)
    • JESD8-B/JESD36 (2.7 V to 3.6 V)
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • 5 Ω switch connection between two ports
  • Rail to rail switching on data I/O ports
  • CMOS low power consumption
  • Latch-up performance meets requirements of JESD78 Class I
  • IOFF circuitry provides partial power down mode operation
  • Multiple package options
  • Specified from -40 C° to +85 °C and -40 °C to +125 °C

Target applications

Parametrics

Type numberProduct statusVCC (V)VPASS (V)Logic switching levelsRON (Ohm)f(-3dB) (MHz)No of bitstpd (ns)Power dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74CBTLV1G125GVProduction2.3 - 3.63.3CMOS / LVTTL740010.2very Low-40~12525956.6160TSOP5

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74CBTLV1G125GV
TSOP5
(SOT753)
SOT753Reel 7" Q3/T4, ReverseActiveStandard Marking74CBTLV1G125GV,125
( 9352 803 18125 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFRMTBF (hour)MSLMSL leadfree
74CBTLV1G125GV74CBTLV1G125GV,12574CBTLV1G125GVAlways Pb-free144.93.293.04E811
Quality and reliability disclaimer

Documentation (5)

File nameTitleTypeDate
74CBTLV1G125Single bus switchData sheet2017-03-17
AN10161PicoGate Logic footprintsApplication note2002-10-29
75017511Voltage translation: How to manage mixed-voltage designs with NXP level translatorsBrochure2014-05-19
SOT753_125Tape reel SMD; reversed product orientation 12NC ending 125Packing2012-11-29
SOT753plastic, surface-mounted package; 5 leads; 0.95 mm pitch; 2.9 mm x 1.5 mm x 1 mm bodyOutline drawing2017-01-30

Support

Find answers to your design questions on this page. If available you can find information in our Nexperia Support Community or you can find Nexperia models and Design tools.

Ordering

DistributorBuy online
Arrow ElectronicsBuy online
Avnet ExpressBuy online
Chip One StopBuy online
DigiKeyBuy online
Farnell EuropeBuy online
Future ElectronicsBuy online
Mouser ElectronicsBuy online
NewarkBuy online
Newark element14Buy online

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.