Register once, drag and drop ECAD models into your CAD tool and speed up your design.

Click here for more information

74AUP2G157GM NRND ECAD models PCB Symbol, Footprint & ECAD Model

Low-power 2-input multiplexer

The 74AUP2G157 is a single 2-input multiplexer which select data from two data inputs (I0andI1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y, Y) presents the selected data in the true (non-inverted) and complement form. The enable input (E) is active LOW. When E is HIGH, the output Y is forced LOW and the output Y is forced HIGH regardless of all other input conditions.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

Not recommended for new designs (NRND), click here for the alternative product.
This product has been discontinued, click here for discontinuation information and replacement parts.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74AUP2G157GM 74AUP2G157GM,125 935281436125 SOT902-2 Order product

Features

  • Wide supply voltage range from 0.8 V to 3.6 V
  • High noise immunity
  • Complies with JEDEC standards:
    • JESD8-12 (0.8 V to 1.3 V)
    • JESD8-11 (0.9 V to 1.65 V)
    • JESD8-7 (1.2 V to 1.95 V)
    • JESD8-5 (1.8 V to 2.7 V)
    • JESD8-B (2.7 V to 3.6 V)
  • ESD protection:
    • HBM JESD22-A114F Class 3A exceeds 5000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Low static power consumption; ICC = 0.9 μA (maximum)
  • Latch-up performance exceeds 100 mA per JESD 78 Class II
  • Inputs accept voltages up to 3.6 V
  • Low noise overshoot and undershoot < 10 % of VCC
  • IOFF circuitry provides partial Power-down mode operation
  • Multiple package options
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Target applications

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Package name
74AUP2G157GM
NRND
End of life1.1 - 3.6CMOS1.9/-1.93.4ultra low-40~125251128.0XQFN8

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackageOutline versionReflow-/Wave solderingPacking
74AUP2G157GM
NRND
74AUP2G157GM,125
( 9352 814 36125 )
Discontinued / End-of-lifea2P
XQFN8
(SOT902-2)
SOT902-2Reel 7" Q3/T4, Reverse

Discontinuation information

Type numberOrderable part numberlabel.orderingCodeLast time buy dateLast time delivery dateReplacement productStatusComments
74AUP2G157GM
NRND
74AUP2G157GM,12593528143612574AUP2G157GT

Quality, reliability & chemical content

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part numberChemical contentRoHS / RHFMSLMSL leadfree
74AUP2G157GM
NRND
74AUP2G157GM,12574AUP2G157GM11
Quality and reliability disclaimer

Documentation (7)

File nameTitleTypeDate
74AUP2G157Low-power 2-input multiplexerData sheet2019-03-15
AN10161PicoGate Logic footprintsApplication note2002-10-29
AN11052Pin FMEA for AUP familyApplication note2019-01-09
aup2g157aup2g157 IBIS modelIBIS model2013-04-07
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Leaflet2019-04-12
SOT902-2_125XQFN8; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-02-13
SOT902-2plastic, leadless extremely thin quad flat package; 8 terminals; 0.5 mm pitch; 1.6 mm x 1.6 mm x 0.5 mm bodyOutline drawing2018-11-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
aup2g157aup2g157 IBIS modelIBIS model2013-04-07