×

74LV4051PW-Q100

8-channel analog multiplexer/demultiplexer

The 74LV4051-Q100 is an 8-channel analog multiplexer/demultiplexer with three digital select inputs (S0 to S2), an active-LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). It is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC4051 and 74HCT4051. With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2.

VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 1.0 V to 6.0 V. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 6.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74LV4051PW-Q100 74LV4051PW-Q100J 935691250118 SOT403-1 Order product

Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

  • Optimized for low-voltage applications: 1.0 V to 6.0 V

  • Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V

  • Low ON resistance:

    • 145 Ω (typical) at VCC - VEE = 2.0 V

    • 80 Ω (typical) at VCC - VEE = 3.0 V

    • 60 Ω (typical) at VCC - VEE = 4.5 V

  • Logic level translation:

    • To enable 3 V logic to communicate with ±3 V analog signals

  • Typical ‘break before make’ built in

  • ESD protection:
    • HBM JESD22-A114E exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

Parametrics

Type numberProduct statusConfigurationVCC (V)RON (Ω)Logic switching levelsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74LV4051PW-Q100ProductionSP8T-Z1.0 - 6.0135TTLvery low-40~1251162.544.4TSSOP16

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74LV4051PW-Q10074LV4051PW-Q100J
( 9356 912 50118 )
ActiveLV4051
TSSOP16
(SOT403-1)
SOT403-1SSOP-TSSOP-VSO-WAVE
SOT403-1_118

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74LV4051PW-Q10074LV4051PW-Q100J74LV4051PW-Q100
Quality and reliability disclaimer

Documentation (4)

File nameTitleTypeDate
74LV4051_Q1008-channel analog multiplexer/demultiplexerData sheet2021-07-16
74LV4051PW-Q100_Nexperia_Product_Reliability74LV4051PW-Q100 Nexperia Product ReliabilityQuality document2023-05-29
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT403-1_118TSSOP16; Reel pack for SMD, 13"; Q1/T1 product orientationPacking information2020-02-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74LV4051PW-Q10074LV4051PW-Q100J935691250118SOT403-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.