×

74LV4053D

Triple single-pole double-throw analog switch

The 74LV4053 is a triple single-pole double-throw (SPDT) analog switch, suitable for use in 2:1 multiplexer/demultiplexer applications. Each switch features a digital select input (Sn), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). A digital enable input (E) is common to all switches. When E is HIGH, the switches are turned off.

Digital inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74LV4053D 74LV4053D,118 935175860118 SOT109-1 Order product

Features and benefits

  • Wide supply voltage range from 1.0 V to 6.0 V

  • Optimized for low-voltage applications: 1.0 V to 3.6 V

  • CMOS low power disssipation

  • Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V

  • Low ON resistance:

    • 180 Ω (typical) at VCC - VEE = 2.0 V

    • 100 Ω (typical) at VCC - VEE = 3.0 V

    • 75 Ω (typical) at VCC - VEE = 4.5 V

  • Logic level translation:

    • To enable 3 V logic to communicate with ±3 V analog signals

  • Typical ‘break before make’ built in

  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
  • Complies with JEDEC standards:
    • JESD8-7 (1.65 V to 1.95 V)
    • JESD8-5 (2.3 V to 2.7 V)
    • JESD8C (2.7 V to 3.6 V)
    • JESD36 (4.6 V to 5.5 V)
  • ESD protection:

    • HBM JESD22-A114-C exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

  • Multiple package options

  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Parametrics

Type numberProduct statusConfigurationVCC (V)Logic switching levelsRON (Ω)RON(FLAT) (Ω)f(-3dB) (MHz)THD (%)Xtalk (dB)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74LV4053DProductionSPDT-Z1.0 - 6.0TTL150301800.4-60very low-40~125846.343.6SO16

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74LV4053D74LV4053D,118
( 9351 758 60118 )
Active74LV4053D
SO16
(SOT109-1)
SOT109-1SO-SOJ-REFLOW
SO-SOJ-WAVE
SOT109-1_118

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74LV4053D74LV4053D,11874LV4053D
Quality and reliability disclaimer

Documentation (8)

File nameTitleTypeDate
74LV4053Triple single-pole double-throw analog switchData sheet2021-09-15
74LV4053D_Nexperia_Product_Reliability74LV4053D Nexperia Product ReliabilityQuality document2022-05-04
lvlv Spice modelSPICE model2013-05-06
SO-SOJ-REFLOWFootprint for reflow solderingReflow soldering2009-10-08
SO-SOJ-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT109-1_118SO16; Reel pack for SMD, 13"; Q1/T1 product orientationPacking information2023-01-17
WAVE_BG-BD-1Wave soldering profileWave soldering2021-09-08
SOT109-1_112SO16; Tube pack; Standard product orientationPacking information2021-09-10

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
lvlv Spice modelSPICE model2013-05-06

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74LV4053D74LV4053D,118935175860118SOT109-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.