×

74LV138PW

3-to-8 line decoder/demultiplexer; inverting

The 74LV138 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7). The 74LVC138A features three enable inputs (Y1, Y2 and E3). Every output will be HIGH unless Y1 and Y2 are LOW and E3 is HIGH. This multiple enable function allows easy parallel expansion of the 74LV138 to a 1-of-32 (5 to 32 lines) decoder with just four 74LV138 ICs and one inverter. The 74LV138 can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74LV138PW 74LV138PW,118 935174390118 SOT403-1 Order product

Features and benefits

  • Wide supply voltage range from 1.0 to 5.5 V

  • Optimized for low voltage applications: 1.0 V to 3.6 V

  • CMOS low power dissipation

  • Direct interface with TTL levels

  • Typical output ground bounce < 0.8 V at VCC = 3.3 V and Tamb = 25 °C

  • Typical HIGH-level output voltage (VOH) undershoot: > 2 V at VCC = 3.3 V and Tamb = 25 °C

  • Demultiplexing capability

  • Multiple input enable for easy expansion

  • Ideal for memory chip select decoding

  • Active LOW mutually exclusive outputs

  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

  • Complies with JEDEC standards

    • JESD8-7 (1.65 V to 1.95 V)

    • JESD8-5 (2.3 V to 2.7 V)

    • JESD8C (2.7 V to 3.6 V)

    • JESD36 (4.5 V to 5.5 V)

  • ESD protection:

    • HBM JESD22-A114E exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

  • Multiple package options

  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74LV138PWProduction1.0 - 5.5TTL± 1212low-40~1251152.243TSSOP16

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74LV138PW74LV138PW,118
( 9351 743 90118 )
ActiveLV138
TSSOP16
(SOT403-1)
SOT403-1SSOP-TSSOP-VSO-WAVE
SOT403-1_118

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74LV138PW74LV138PW,11874LV138PW
Quality and reliability disclaimer

Documentation (5)

File nameTitleTypeDate
74LV1383-to-8 line decoder/demultiplexer; invertingData sheet2021-07-22
74LV138PW_Nexperia_Product_Reliability74LV138PW Nexperia Product ReliabilityQuality document2023-05-29
lvlv Spice modelSPICE model2013-05-06
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT403-1_118TSSOP16; Reel pack for SMD, 13"; Q1/T1 product orientationPacking information2020-02-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
lvlv Spice modelSPICE model2013-05-06

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74LV138PW74LV138PW,118935174390118SOT403-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.