74AVC16245DGG-Q100

16-bit transceiver with direction pin; 3.6 V tolerant; 3-state

The 74AVC16245-Q100 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features two output enable inputs (nOE) for easy cascading and two send/receive inputs (nDIR) for direction control. Inputs nOE control the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver.

The 74AVC16245-Q100 is designed to have an extremely fast propagation delay and a minimum amount of power consumption.

To ensure the high-impedance output state during power-up or power-down, tie pins nOE to VCC through a pull-up resistor (Live Insertion).

A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 3) and is suitable for use in automotive applications.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74AVC16245DGG-Q100 74AVC16245DGG-Q10J 935300769118 SOT362-1 Order product

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 3)
    • Specified from -40 °C to +85 °C
  • Wide supply voltage range from 1.2 V to 3.6 V
  • Complies with JEDEC standards:
    • JESD8-7 (1.2 V to 1.95 V)
    • JESD8-5 (1.8 V to 2.7 V)
    • JESD8-1A (2.7 V to 3.6 V)
  • ESD protection:
    • MIL-STD-883, method 3015 exceeds 1000 V
    • HBM JESD22-A114F exceeds 1000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
  • CMOS low power consumption
  • Input/output tolerant up to 3.6 V
  • Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
  • Low inductance multiple VCC and GND pins to minimize noise and ground bounce
  • Supports Live Insertion

Target applications

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)fmax (MHz)No of bitsPower dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Package name
74AVC16245DGG-Q100Production1.2 - 3.6CMOS+/- 1220016low-40~8510423.0TSSOP48

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74AVC16245DGG-Q100
TSSOP48
(SOT362-1)
SOT362-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveAVC1624574AVC16245DGG-Q10J
( 9353 007 69118 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateMSLMSL leadfree
74AVC16245DGG-Q10074AVC16245DGG-Q10J74AVC16245DGG-Q100Always Pb-free11
Quality and reliability disclaimer

Documentation (9)

File nameTitleTypeDate
74AVC16245_Q10016-bit transceiver with direction pin; 3.6 V tolerant; 3-stateData sheet2017-03-30
AN251AVC Logic FamilyApplication note1999-01-14
AN252Live Insertion Aspects of Philips Logic FamiliesApplication note2013-03-13
AN10156Sorting through the low voltage logic mazeApplication note2013-03-13
AN90007Pin FMEA for AVC familyApplication note2018-11-30
avc1624574AVC16245 IBIS modelIBIS model2019-01-09
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT362-1_118TSSOP48; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering code (12NC) ending 118Packing2013-04-15
SOT362-1plastic, thin shrink small outline package; 48 leads; 0.5 mm pitch; 12.8 mm x 6.1 mm x 1.2 mm bodyOutline drawing2018-10-18

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
avc1624574AVC16245 IBIS modelIBIS model2019-01-09

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingBuy online
74AVC16245DGG-Q10074AVC16245DGG-Q10J935300769118Reel 13" Q1/T1Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.