Nexperia
Or cross multiple parts
×

74HC4852PW-Q100

Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control

The 74HC4852-Q100; 74HCT4852-Q100 are dual single-pole quad-throw analog switches (SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 & S1) are common to both switches. When E is HIGH, the switches are turned off. The device features injection-current effect control. This allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel, eliminating the need for external diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74HC4852PW-Q100 74HC4852PW-Q100,11 935298469118 SOT403-1 Order product

Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

  • Injection-current cross coupling < 1 mV/mA

  • Wide supply voltage range from 2.0 V to 6.0 V for 74HC4852-Q100

  • ESD protection:

    • MIL-STD-883, method 3015 exceeds 2000 V

    • HBM JESD22-A114F exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 Ω)

  • Latch-up performance exceeds 100 mA per JESD 78 Class II level A

  • Low ON-state resistance:

    • 400 Ω (typical) at VCC = 2.0 V

    • 215 Ω (typical) at VCC = 3.0 V

    • 120 Ω (typical) at VCC = 3.3 V

    • 76 Ω (typical) at VCC = 4.5 V

    • 59 Ω (typical) at VCC = 6.0 V

  • DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

Applications

  • Analog multiplexing and demultiplexing

  • Digital multiplexing and demultiplexing

  • Signal gating

  • Automotive application

Parametrics

Type numberProduct statusConfigurationVCC (V)RON (Ω)Logic switching levelsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HC4852PW-Q100ProductionSP4T-Z2.0 - 10.0220CMOSvery low-40~1251121.740.5TSSOP16

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74HC4852PW-Q10074HC4852PW-Q100,11
( 9352 984 69118 ) 		ActiveHC4852
TSSOP16
(SOT403-1) 		SOT403-1SSOP-TSSOP-VSO-WAVE
SOT403-1_118

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74HC4852PW-Q10074HC4852PW-Q100,1174HC4852PW-Q100
Quality and reliability disclaimer

Series

Documentation (6)

File nameTitleTypeDate
74HC_HCT4852_Q100Dual 4-channel analog multiplexer/demultiplexer with injection-current effect controlData sheet2020-04-29
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
74HC4852PW-Q100_Nexperia_Product_Reliability74HC4852PW-Q100 Nexperia Product ReliabilityQuality document2023-05-29
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT403-1_118TSSOP16; Reel pack for SMD, 13"; Q1/T1 product orientationPacking information2020-02-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74HC4852PW-Q10074HC4852PW-Q100,11935298469118SOT403-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet