×

74AXP1T14GW

Dual supply Schmitt trigger inverter

The 74AXP1T14 is a dual supply Schmitt trigger inverter. It features one input (A), an output (Y) and dual supply pins (VCCI and VCCO). The input is referenced to VCCI and the output is referenced to VCCO. Input A can be connected directly to VCCI or GND. VCCI can be supplied at any voltage between 0.7 V and 2.75 V and VCCO can be supplied at any voltage between 1.2 V and 5.5 V. This feature allows voltage level translation.

This device ensures very low static and dynamic power consumption across the entire supply range and is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

This product has been discontinued, click here for discontinuation information and replacement parts.

Features and benefits

  • Wide supply voltage range:

    • VCCI: 0.7 V to 2.75 V

    • VCCO: 1.2 V to 5.5 V

  • Low input capacitance; CI = 0.6 pF (typical)

  • Low output capacitance; CO = 1.8 pF (typical)

  • Low dynamic power consumption; CPD = 0.5 pF at VCCI = 1.2 V (typical)

  • Low dynamic power consumption; CPD = 7.1 pF at VCCO = 3.3 V (typical)

  • Low static power consumption; ICCI = 0.5 μA (85 °C maximum)

  • Low static power consumption; ICCO = 1.8 μA (85 °C maximum)

  • High noise immunity

  • Complies with JEDEC standard:

    • JESD8-12A.01 (1.1 V to 1.3 V; A input)

    • JESD8-11A.01 (1.4 V to 1.6 V)

    • JESD8-7A (1.65 V to 1.95 V)

    • JESD8-5A.01 (2.3 V to 2.7 V)

    • JESD8-C (2.7 V to 3.6 V; Y output)

    • JESD12-6 (4.5 V to 5.5 V; Y output)

  • ESD protection:

    • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

    • CDM JESD22-C101E exceeds 1000 V

  • Latch-up performance exceeds 100 mA per JESD78D Class II

  • Inputs accept voltages up to 2.75 V

  • Low noise overshoot and undershoot < 10% of VCCO

  • IOFF circuitry provides partial power-down mode operation

  • Specified from -40 °C to +85 °C

Parametrics

Type number Product status Logic switching levels Output drive capability (mA) Nr of bits Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
74AXP1T14GW End of life CMOS ± 12 1 ultra low -40~85 275 48.0 163 TSSOP5

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74AXP1T14GW 74AXP1T14GWH
(935308974125)
Withdrawn / End-of-life rL SOT353-1
TSSOP5
(SOT353-1)
SOT353-1 WAVE_BG-BD-1
SOT353-1_125

Environmental information

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number Chemical content RoHS RHF-indicator
74AXP1T14GW 74AXP1T14GWH 74AXP1T14GW rohs rhf rhf
Quality and reliability disclaimer

Documentation (12)

File name Title Type Date
74AXP1T14 Dual supply Schmitt trigger inverter Data sheet 2022-02-02
AN90029 Pin FMEA for AXPnT family Application note 2021-07-13
Nexperia_document_guide_Logic_translators Nexperia Logic Translators Brochure 2021-04-12
Nexperia_document_guide_MiniLogic_PicoGate_201901 PicoGate leaded logic portfolio guide Brochure 2019-01-07
SOT353-1 3D model for products with SOT353-1 package Design support 2019-09-23
axp1t14 74AXP1T14 IBIS Model IBIS model 2016-12-13
Nexperia_document_leaflet_Logic_AXP_technology_portfolio_201904 AXP – Extremely low-power logic technology portfolio Leaflet 2019-04-05
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
TSSOP5_SOT353-1_mk plastic, thin shrink small outline package; 5 leads; 0.65 mm pitch; 2 mm x 1.25 mm x 0.95 mm body Marcom graphics 2018-07-25
SOT353-1 plastic thin shrink small outline package; 5 leads; body width 1.25 mm Package information 2022-11-15
74AXP1T14GW_Nexperia_Product_Reliability 74AXP1T14GW Nexperia Product Reliability Quality document 2022-05-04
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
axp1t14 74AXP1T14 IBIS Model IBIS model 2016-12-13
SOT353-1 3D model for products with SOT353-1 package Design support 2019-09-23

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.