×

74HC595PW

8-bit serial-in, serial or parallel-out shift register with output latches; 3-state

The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset MR input. A LOW on MR will reset the shift register. Data is shifted on the LOW-to-HIGH transitions of the SHCP input. The data in the shift register is transferred to the storage register on a LOW-to-HIGH transition of the STCP input. If both clocks are connected together, the shift register will always be one clock pulse ahead of the storage register. Data in the storage register appears at the output whenever the output enable input (OE) is LOW. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the registers. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74HC595PW 74HC595PW,118 935188520118 SOT403-1 Order product

Features and benefits

  • Wide supply voltage range from 2.0 V to 6.0 V
  • CMOS low power dissipation
  • High noise immunity
  • 8-bit serial input

  • 8-bit serial or parallel output

  • Storage register with 3-state outputs

  • Shift register with direct clear

  • 100 MHz (typical) shift out frequency

  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
  • Complies with JEDEC standards:
    • JESD8C (2.7 V to 3.6 V)
    • JESD7A (2.0 V to 6.0 V)
  • Input levels:

    • For 74HC595: CMOS level

    • For 74HCT595: TTL level

  • ESD protection:

    • HBM JESD22-A114F exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

  • Multiple package options

  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Applications

  • Serial-to-parallel data conversion

  • Remote control holding register

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Nr of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HC595PWProduction2.0 - 6.0CMOS± 7.8161088low-40~1251234.152.2TSSOP16

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74HC595PW74HC595PW,118
( 9351 885 20118 )
ActiveHC595
TSSOP16
(SOT403-1)
SOT403-1SSOP-TSSOP-VSO-WAVE
SOT403-1_118

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74HC595PW74HC595PW,112
( 9351 885 20112 )
Withdrawn / End-of-lifeHC595
TSSOP16
(SOT403-1)
SOT403-1SSOP-TSSOP-VSO-WAVE
SOT403-1_112

Discontinuation information

Type numberOrderable part numberOrdering codeLast time buy dateLast time delivery dateReplacement productStatusComments
74HC595PW74HC595PW,1129351885201122021-12-312022-06-3074HC595PWVersion withdrawal

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74HC595PW74HC595PW,11874HC595PW

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74HC595PW74HC595PW,11274HC595PW
Quality and reliability disclaimer

Documentation (8)

File nameTitleTypeDate
74HC_HCT5958-bit serial-in, serial or parallel-out shift register with output latches; 3-stateData sheet2021-09-10
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
hc595IBIS model of 74HC595IBIS model2021-02-02
74HC595PW_Nexperia_Product_Reliability74HC595PW Nexperia Product ReliabilityQuality document2023-05-29
hcHC/HCT Spice modelSPICE model2022-02-17
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT403-1_118TSSOP16; Reel pack for SMD, 13"; Q1/T1 product orientationPacking information2020-02-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
hc595IBIS model of 74HC595IBIS model2021-02-02
hcHC/HCT Spice modelSPICE model2022-02-17

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74HC595PW74HC595PW,118935188520118SOT403-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.