Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)
NID1101UP

NID1101UP Production

1.5 V to 5.5 V, 1.5 A, compact ideal diode with forward voltage blocking

The NID1101 is a compact, high-efficiency ideal diode that replaces traditional Schottky diodes in low-voltage power systems. It provides a low froward voltage drop alternative to traditional Schottky diodes while integrating both forward and true reverse current blocking.

The NID1101 operates across a 1.5 V to 5.5 V input range, and supports up to 1.5 A of continuous current. It is well suited for applications that require minimal power loss and precise current control, such as power OR-ing, redundant supply switchover, and reverse current protection. In dual-supply configurations, it enables seamless transition between sources without the need for additional control logic.

An active-high enable (EN) pin governs device operation.

  • When EN is low, the NID1101 remains off, blocking current flow in both directions.

  • When EN is asserted and the input voltage (IN) exceeds the output voltage (OUT), the device activates with controlled turn-on, managing inrush current during startup.

Once enabled, the device starts up in a controlled manner limiting the amount of inrush current. Once startup is completed, the device regulates the voltage between the IN and OUT pins that is approximately an order of magnitude lower than similarly rated Schottky diodes.

To ensure robust system performance, the NID1101 integrates short-circuit current limiting and thermal shutdown protection. If the output voltage rises above the input, the device automatically enters a high⁠-⁠impedance state with minimal reverse leakage current, effectively preventing reverse conduction.

A variety of power OR-ing configurations are supported for system flexibility:

  • Two, or more, NID1101 devices
  • NID1101s and conventional Schottky diodes

The NID1101 is available in a compact WLCSP4 (SOT8113) package and is characterized for operation over an ambient temperature range of –40 °C to 125 °C.
  • Product details
  • Documentation
  • Support
  • Ordering
  • Interactive datasheet

Product details

Features and benefits

  • Input voltage range: 1.5 V to 5.5 V

  • Low forward drop voltage: VFWD = 29 mV (typ. at 3.6 V input and 100 mA load current)

  • Reverse voltage blocking always

    • Low leakage current when VOUT > VIN

  • Forward voltage blocking when disabled

  • Low quiescent current

  • Enhanced load transient response

  • Controlled slew rate at start-up

  • Over temperature protection

  • Short-circuit protection

  • SOT8113, 4-pin, wafer level chip scale package

  • Specified over Ta= -40 °C to +125 °C

Applications

  • Smart wearables
  • OR-ing applications
  • Diode replacement
  • Battery backup systems
  • USB powered devices
Figure 1. Simplified application

Register once, drag and drop ECAD models into your CAD tool and speed up your design.

More information

Quality and reliability disclaimer

Support

Please contact us if you have any questions. If you are in need of design support, please fill in the technical support form, we will get back to you shortly.

Please visit our engineer exchange forum or contact us for further support.

Longevity

The Nexperia Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our Executive Management Team. View our longevity program here.

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

Interactive datasheet

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet