Register once, drag and drop ECAD models into your CAD tool and speed up your design.

Click here for more information

74HCT85DB NRND ECAD models PCB Symbol, Footprint & ECAD Model

4-bit magnitude comparator

The 74HC85; 74HCT85 is a 4-bit magnitude comparator that can be expanded to almost any length. They perform comparison of two 4-bit binary, BCD or other monotonic codes and present the three possible magnitude results at the outputs (QA>B,QA=BandQA<B). The 4-bit inputs are weighted (A0 to A3 and B0 to B3), where A3 and B3 are the most significant bits. For proper compare operation the expander inputs (IA>B,IA=BandIA<B) to the least significant position must be connected as follows: IA<B=IA>B=LOW andIA=B=HIGH. For words greater than 4-bits, units can be cascaded by connecting outputs QA>B, QA=B and QA<B to the corresponding inputs of the significant comparator. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Not recommended for new designs (NRND), click here for the alternative product.
This product has been discontinued, click here for discontinuation information and replacement parts.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74HCT85DB 74HCT85DB,118 935190310118 SOT338-1 Order product
74HCT85DB 74HCT85DB,112 935190310112 SOT338-1 Order product

Features

  • Wide supply voltage range from 2.0 to 6.0 V
  • CMOS low power dissipation
  • High noise immunity
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
  • Input levels:
    • For 74HC85: CMOS level
    • For 74HCT85: TTL level
  • Complies with JEDEC standard: no. 7A
    • JESD8C (2.7 V to 3.6 V)
    • JESD7A (2.0 V to 6.0 V)
  • ESD protection:
    • HBM JESD22-A114-A exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Target applications

  • Process controllers
  • Servo-motor control

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)No of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Package name
74HCT85DB
NRND
End of life4.5 - 5.5TTL+/- 4.0264low-40~12514842.0SSOP16

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackageOutline versionReflow-/Wave solderingPacking
74HCT85DB
NRND
74HCT85DB,118
( 9351 903 10118 )
Discontinued / End-of-lifeHCT85
SSOP16
(SOT338-1)
SOT338-1SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1
74HCT85DB,112
( 9351 903 10112 )
Discontinued / End-of-lifeHCT85Bulk Pack

Discontinuation information

Type numberOrderable part numberlabel.orderingCodeLast time buy dateLast time delivery dateReplacement productStatusComments
74HCT85DB
NRND
74HCT85DB,11893519031011874HCT85D
74HCT85DB
NRND
74HCT85DB,11293519031011274HCT85D

Quality, reliability & chemical content

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part numberChemical contentRoHS / RHFMSLMSL leadfree
74HCT85DB
NRND
74HCT85DB,11874HCT85DB11
74HCT85DB
NRND
74HCT85DB,11274HCT85DB11
Quality and reliability disclaimer

Documentation (6)

File nameTitleTypeDate
74HC_HCT854-bit magnitude comparatorData sheet2018-04-23
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SSOP-TSSOP-VSO-REFLOWFootprint for reflow solderingReflow soldering2009-10-08
SOT338-1plastic, shrink small outline package; 16 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm bodyOutline drawing2018-10-18

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.