74AUP1Z125

Low-power X-tal driver with enable and internal resistor; 3-state

The 74AUP1Z125 combines the functions of the 74AUP1GU04 and 74AUP1G125 with enable circuitry and an internal bias resistor to provide a device optimized for use in crystal oscillator applications.

When not in use the EN input can be driven HIGH, pulling up the X1 input and putting the device in a low-power disable mode. Schmitt trigger action at the EN input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF at output Y. The IOFF circuitry disables the output Y, preventing the damaging backflow current through the device when it is powered down

The integration of the two devices into the 74AUP1Z125 produces the benefits of a compact footprint, lower power dissipation and stable operation over a wide range of frequency and temperature.

Features

  • Wide supply voltage range from 0.8 V to 3.6 V
  • High noise immunity
  • ESD protection:
    • HBM JESD22-A114F Class 3A exceeds 5000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Latch-up performance exceeds 100 mA per JESD78B Class II
  • Inputs accept voltages up to 3.6 V
  • Low noise overshoot and undershoot < 10 % of VCC
  • IOFF circuitry provides partial power-down mode operation at output Y
  • Multiple package options
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)No of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AUP1Z125GMProduction1.1 - 3.6CMOS± 1.94.7701ultra low-40~1252906.5145XSON6
74AUP1Z125GNProduction1.1 - 3.6CMOS± 1.94.7701ultra low-40~12527511.7171XSON6
74AUP1Z125GSProduction1.1 - 3.6CMOS± 1.94.7701ultra low-40~12527214.8177XSON6
74AUP1Z125GWProduction1.1 - 3.6CMOS± 1.94.7701ultra low-40~12526438.6153TSSOP6

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74AUP1Z125GM
XSON6
(SOT886)
SOT886Reel 7" Q1/T1, Q3/T4Active55.074AUP1Z125GM,132
( 9352 805 25132 )
Reel 7" Q1/T1Active55.074AUP1Z125GM,115
( 9352 805 25115 )
74AUP1Z125GN
XSON6
(SOT1115)
SOT1115Reel 7" Q1/T1, Q3/T4Active55.074AUP1Z125GN,132
( 9352 917 58132 )
74AUP1Z125GS
XSON6
(SOT1202)
SOT1202Reel 7" Q1/T1, Q3/T4Active55.074AUP1Z125GS,132
( 9352 928 84132 )
74AUP1Z125GW
TSSOP6
(SOT363)
SOT363Reel 7" Q3/T4, ReverseActive55.074AUP1Z125GW,125
( 9352 805 24125 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateMSLMSL leadfree
74AUP1Z125GM74AUP1Z125GM,13274AUP1Z125GMAlways Pb-free11
74AUP1Z125GM74AUP1Z125GM,11574AUP1Z125GMAlways Pb-free11
74AUP1Z125GN74AUP1Z125GN,13274AUP1Z125GNAlways Pb-free11
74AUP1Z125GS74AUP1Z125GS,13274AUP1Z125GSAlways Pb-free11
74AUP1Z125GW74AUP1Z125GW,12574AUP1Z125GWAlways Pb-free11
Quality and reliability disclaimer

Documentation (21)

File nameTitleTypeDate
74AUP1Z125Low-power X-tal driver with enable and internal resistor; 3-stateData sheet2017-05-03
aup1z125aup1z125 IBIS modelIBIS model2014-12-21
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Leaflet2019-04-12
Nexperia_document_Logic_CombinationLogic_infocard_201710Combination logic solutions cardLeaflet2017-10-16
nexperia_selection_guide_2019_201901Selection guide 2019. Discretes, Logic and MOSFETsSelection guide2018-12-12
SOT1202_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-01-13
MAR_SOT1202MAR_SOT1202 TopmarkTop marking2013-06-03
SOT1202plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1mm x 0.35 mm bodyOutline drawing2018-11-14
MAR_SOT1115MAR_SOT1115 TopmarkTop marking2013-06-03
SOT1115_132Reversed product orientation 12NC ending 132Packing2013-04-04
SOT1115plastic, leadless extremely thin small outline package; 6 terminals; 0.3 mm pitch; 0.9 mm x 1 mm x 0.35 mm bodyOutline drawing2018-11-14
SOT363_165TSSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-20
SOT363_125Tape reel SMD; reversed product orientation 12NC ending 125Packing2012-11-20
SOT363_135TSSOP6; Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-20
MAR_SOT363MAR_SOT363 TopmarkTop marking2013-06-03
SOT363_115TSSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-15
SOT363plastic, surface-mounted package; 6 leads; 0.65 mm pitch; 2.1 mm x 1.25 mm x 0.95 mm bodyOutline drawing2018-11-14
SOT886_115XSON6; Reel pack; SMD, 7" Q1/T1 Standard product orientation Orderable part number ending ,115 or X Ordering code (12NC) ending 115Packing2013-04-23
MAR_SOT886MAR_SOT886 TopmarkTop marking2013-06-03
SOT886_132XSON6; reel pack; standard product orientation; 12NC ending 132Packing2012-11-28
SOT886plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 mm bodyOutline drawing2018-11-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
aup1z125aup1z125 IBIS modelIBIS model2014-12-21

Ordering, pricing & availability

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.