Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)
XS3A4053PW

XS3A4053PW Production

Triple low-ohmic single-pole double-throw analog switch

The XS3A4053 is a triple low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). All three switches share an enable input (E). A digital enable pin E is common to all switches.When E is HIGH, the switches are turned off.

Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the XS3A4053 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The XS3A4053 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.
  • Product details
  • Documentation
  • Support
  • Ordering
  • Interactive datasheet

Product details

Features and benefits

  • Wide supply voltage range from 1.4 V to 4.3 V

  • Very low ON resistance (peak):

    • 1.6 Ω (typical) at VCC = 1.4 V

    • 1.0 Ω (typical) at VCC = 1.65 V

    • 0.55 Ω (typical) at VCC = 2.3 V

    • 0.5 Ω (typical) at VCC = 2.7 V

    • 0.5 Ω (typical) at VCC = 4.3 V

  • Break-before-make switching

  • High noise immunity

  • CMOS low-power consumption

  • Latch-up performance exceeds 100 mA per JESD78 Class II Level A

  • 1.8 V control logic at VCC = 3.6 V

  • Control input accepts voltages above supply voltage

  • Very low supply current, even when input is below VCC

  • High current handling capability (350 mA continuous current under 3.3 V supply)

  • ESD protection:

    • HBM ANSI/ESDA/JEDEC JS-001 class 3A exceeds 4000 V

    • CDM ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

    • IEC61000-4-2 contact discharge exceeds 8000 V for switch ports

  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Applications

  • Appliances

  • Communication Systems

  • Medical Equipment

  • Analog Sensor Monitoring

  • Audio Routing/Switching

  • Test and Measurement

Register once, drag and drop ECAD models into your CAD tool and speed up your design.

More information

Quality and reliability disclaimer

Support

Please contact us if you have any questions. If you are in need of design support, please fill in the technical support form, we will get back to you shortly.

Please visit our engineer exchange forum or contact us for further support.

Longevity

The Nexperia Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our Executive Management Team. View our longevity program here.

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

Interactive datasheet

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet