74HC173D

Quad D-type flip-flop; positive-edge trigger; 3-state

The 74HC173; 74HCT173 is a quad positive-edge triggered D-type flip-flop. The device features clock (CP), master reset (MR), two input enable (E1, E2) and two output enable (OE1, OE2) inputs. When the input enables are LOW, the outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on either input enable will cause the device to go into a hold mode, outputs hold their previous state independently of clock and data inputs. A HIGH on MR forces the outputs LOW independently of clock and data inputs. A HIGH on either output enable pin causes the outputs to assume a high-impedance OFF-state. Operation of the output enable inputs does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74HC173D 74HC173D,653 933714560653 SOT109-1 Order product
74HC173D 74HC173D,652 933714560652 SOT109-1 Order product

Features

  • Complies with JEDEC standard no. 7A
  • Input levels:
    • For 74HC173: CMOS level
    • For 74HCT173: TTL level
  • Gated input enable for hold (do nothing) mode
  • Gated output enable control mode
  • Edge-triggered D-type register
  • Asynchronous master reset
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
  • Specified from —40 °C to +85 °C and —40 °C to +125 °C

Target applications

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HC173DProduction2.0 - 6.0CMOS± 7.81788low-40~125721.030SO16

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackageOutline versionReflow-/Wave solderingPacking
74HC173D74HC173D,653
( 9337 145 60653 )
Active74HC173D
SO16
(SOT109-1)
SOT109-1SO-SOJ-REFLOW
SO-SOJ-WAVE
Reel 13" Q1/T1 CECC
74HC173D,652
( 9337 145 60652 )
Active74HC173DBulk Pack, CECC

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFEFRIFRMTBF (hour)MSLMSL leadfree
74HC173D74HC173D,653Not available84.96.621.51E811
74HC173D74HC173D,652Not available84.96.621.51E811
Quality and reliability disclaimer

Documentation (6)

File nameTitleTypeDate
74HC_HCT173Quad D-type flip-flop; positive-edge trigger; 3-stateData sheet2017-03-17
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SO-SOJ-REFLOWFootprint for reflow solderingReflow soldering2009-10-08
SO-SOJ-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT109-1plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.35 mm bodyOutline drawing2018-10-18

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingBuy online
74HC173D74HC173D,653933714560653Reel 13" Q1/T1 CECCOrder product
74HC173D74HC173D,652933714560652Bulk Pack, CECCOrder product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.