74ALVCH16373DGG

2.5 V/3.3 V 16-bit D-type transparent latch; 3-state

The 74ALVCH16373 is 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications.

Incorporates bus hold data inputs which eliminate the need for external pull-up or pull-down resistors to hold unused inputs.

One latch enable (LE) input and one output enable (OE) are provided per 8-bit section.

The 74ALVCH16373 consists of 2 sections of eight D-type transparent latches with 3-state true outputs. When LE is HIGH, data at the nDn inputs enter the latches. In this condition the latches are transparent, therefore a latch output will change each time its corresponding D-input changes.

When LE is LOW, the latches store the information that was present at the nDn inputs at a set-up time preceding the LOW-to-HIGH transition of LE. When OE is LOW, the contents of the eight latches are available at the outputs. When OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input does not affect the state of the latches.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74ALVCH16373DGG 74ALVCH16373DGG,11 935205120112 SOT362-1 Order product
74ALVCH16373DGG 74ALVCH16373DGG:11 935205120118 SOT362-1 Order product
74ALVCH16373DGG 74ALVCH16373DGG,51 935205120512 SOT362-1 Order product
74ALVCH16373DGG 74ALVCH16373DGG:51 935205120518 SOT362-1 Order product

Features

  • Wide supply voltage range from 1.2 V to 3.6 V
  • Complies with JEDEC standard JESD8-B
  • CMOS low power consumption
  • MULTIBYTE flow-through standard pin-out architecture
  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce
  • Direct interface with TTL levels
  • All data inputs have bus hold
  • Output drive capability 50 Ω transmission lines at 85 ℃
  • Current drive ±24 mA at VCC = 3.0 V

Target applications

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)No of bitsPower dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74ALVCH16373DGGProduction2.3 - 3.6LVTTL+/- 242.116low-40~85821.835TSSOP48

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackageOutline versionReflow-/Wave solderingPacking
74ALVCH16373DGG74ALVCH16373DGG,11
( 9352 051 20112 )
ActiveALVCH16373
TSSOP48
(SOT362-1)
SOT362-1SSOP-TSSOP-VSO-WAVE
Bulk Pack
74ALVCH16373DGG:11
( 9352 051 20118 )
ActiveALVCH16373Reel 13" Q1/T1

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackageOutline versionReflow-/Wave solderingPacking
74ALVCH16373DGG74ALVCH16373DGG,51
( 9352 051 20512 )
Withdrawn / End-of-lifeALVCH16373
TSSOP48
(SOT362-1)
SOT362-1SSOP-TSSOP-VSO-WAVE
Tube in Drypack

Discontinuation information

Type numberOrderable part numberlabel.orderingCodeLast time buy dateLast time delivery dateReplacement productStatusComments
74ALVCH16373DGG74ALVCH16373DGG,51935205120512

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFEFRIFRMTBF (hour)MSLMSL leadfree
74ALVCH16373DGG74ALVCH16373DGG,1174ALVCH16373DGG123.83.872.58E811
74ALVCH16373DGG74ALVCH16373DGG:1174ALVCH16373DGG123.83.872.58E811

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part numberChemical contentRoHS / RHFEFRIFRMTBF (hour)MSLMSL leadfree
74ALVCH16373DGG74ALVCH16373DGG,5174ALVCH16373DGG123.83.872.58E822
Quality and reliability disclaimer

Documentation (5)

File nameTitleTypeDate
74ALVCH163732.5 V/3.3 V 16-bit D-type transparent latch; 3-stateData sheet2019-01-30
alvch16373alvch16373 IBIS modelIBIS model2013-04-07
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT362-1_118TSSOP48; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering code (12NC) ending 118Packing2013-04-15
SOT362-1plastic, thin shrink small outline package; 48 leads; 0.5 mm pitch; 12.8 mm x 6.1 mm x 1.2 mm bodyOutline drawing2018-10-18

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
alvch16373alvch16373 IBIS modelIBIS model2013-04-07

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingBuy online
74ALVCH16373DGG74ALVCH16373DGG,11935205120112Bulk PackOrder product
74ALVCH16373DGG74ALVCH16373DGG:11935205120118Reel 13" Q1/T1Order product
74ALVCH16373DGG74ALVCH16373DGG,51935205120512Tube in DrypackOrder product
74ALVCH16373DGG74ALVCH16373DGG:51935205120518Reel 13" Q1/T1 in DrypackOrder product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.