74AUP1G373

Low-power D-type transparent latch; 3-state

The 74AUP1G373 provides the single D-type transparent latch with 3-state output. While the latch-enable (LE) input is high, the Q output follows the data (D) input. When pin LE is LOW, the latch stores the information that was present at the D-input one set-up time preceding the HIGH-to-LOW transition of pin LE. When pin OE is LOW, the contents of the latch is available at the (Q) output. When pin OE is HIGH, the output goes to the high-impedance OFF-state. Operation of input pin OE does not affect the state of the latch.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V.

This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

Features

  • Wide supply voltage range from 0.8 V to 3.6 V
  • High noise immunity
  • Complies with JEDEC standards:
    • JESD8-12 (0.8 V to 1.3 V)
    • JESD8-11 (0.9 V to 1.65 V)
    • JESD8-7 (1.2 V to 1.95 V)
    • JESD8-5 (1.8 V to 2.7 V)
    • JESD8-B (2.7 V to 3.6 V)
  • ESD protection:
    • HBM JESD22-A114F Class 3A exceeds 5000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101-E exceeds 1000 V
  • Low static power consumption; ICC = 0.9 μA (maximum)
  • Latch-up performance exceeds 100 mA per JESD 78 Class II
  • Inputs accept voltages up to 3.6 V
  • Low noise overshoot and undershoot < 10 % of VCC
  • IOFF circuitry provides partial Power-down mode operation
  • Multiple package options
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)No of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AUP1G373GF
NRND
Not for design in1.1 - 3.6CMOS1.9/-1.98.51ultra low-40~1252906.5145XSON6
74AUP1G373GMProduction1.1 - 3.6CMOS1.9/-1.98.51ultra low-40~1252906.5145XSON6
74AUP1G373GNProduction1.1 - 3.6CMOS1.9/-1.98.51ultra low-40~12527511.7171XSON6
74AUP1G373GSProduction1.1 - 3.6CMOS1.9/-1.98.51ultra low-40~12527214.8177XSON6
74AUP1G373GWProduction1.1 - 3.6CMOS1.9/-1.98.51ultra low-40~12526438.6153TSSOP6

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74AUP1G373GF
NRND

XSON6
(SOT891)
SOT891Reel 7" Q1/T1, Q3/T4ActiveaW74AUP1G373GF,132
( 9352 813 32132 )
74AUP1G373GM
XSON6
(SOT886)
SOT886Reel 7" Q1/T1, Q3/T4ActiveaW74AUP1G373GM,132
( 9352 806 22132 )
Reel 7" Q1/T1ActiveaW74AUP1G373GM,115
( 9352 806 22115 )
74AUP1G373GN
XSON6
(SOT1115)
SOT1115Reel 7" Q1/T1, Q3/T4ActiveaW74AUP1G373GN,132
( 9352 917 38132 )
74AUP1G373GS
XSON6
(SOT1202)
SOT1202Reel 7" Q1/T1, Q3/T4ActiveaW74AUP1G373GS,132
( 9352 928 63132 )
74AUP1G373GW
TSSOP6
(SOT363)
SOT363Reel 7" Q3/T4, ReverseActiveaW74AUP1G373GW,125
( 9352 806 21125 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFRMTBF (hour)MSLMSL leadfree
74AUP1G373GF
NRND
74AUP1G373GF,13274AUP1G373GFAlways Pb-free11
74AUP1G373GM74AUP1G373GM,13274AUP1G373GMAlways Pb-free0.03.293.04E811
74AUP1G373GM74AUP1G373GM,11574AUP1G373GMAlways Pb-free0.03.293.04E811
74AUP1G373GN74AUP1G373GN,13274AUP1G373GNAlways Pb-free11
74AUP1G373GS74AUP1G373GS,13274AUP1G373GSAlways Pb-free11
74AUP1G373GW74AUP1G373GW,12574AUP1G373GWAlways Pb-free0.03.293.04E811
Quality and reliability disclaimer

Documentation (25)

File nameTitleTypeDate
74AUP1G373Low-power D-type transparent latch; 3-stateData sheet2017-05-03
AN10161PicoGate Logic footprintsApplication note2002-10-29
AN11052Pin FMEA for AUP familyApplication note2019-01-09
aup1g373aup1g373 IBIS modelIBIS model2014-12-21
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Leaflet2019-04-12
nexperia_selection_guide_2019_201901Selection guide 2019. Discretes, Logic and MOSFETsSelection guide2018-12-12
MAR_SOT1202MAR_SOT1202 TopmarkTop marking2013-06-03
SOT1202_132Reversed product orientation 12NC ending 132Packing2013-04-04
SOT1202plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1mm x 0.35 mm bodyOutline drawing2018-11-14
MAR_SOT1115MAR_SOT1115 TopmarkTop marking2013-06-03
SOT1115_132Reversed product orientation 12NC ending 132Packing2013-04-04
SOT1115plastic, leadless extremely thin small outline package; 6 terminals; 0.3 mm pitch; 0.9 mm x 1 mm x 0.35 mm bodyOutline drawing2018-11-14
MAR_SOT891MAR_SOT891 TopmarkTop marking2013-06-03
SOT891_132XSON6; reel pack; standard product orientation; 12NC ending 132Packing2014-08-26
SOT891plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1 mm x 0.5 mm bodyOutline drawing2018-11-14
SOT363_165TSSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-20
SOT363_125Tape reel SMD; reversed product orientation 12NC ending 125Packing2012-11-20
SOT363_135TSSOP6; Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-20
MAR_SOT363MAR_SOT363 TopmarkTop marking2013-06-03
SOT363_115TSSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-15
SOT363plastic, surface-mounted package; 6 leads; 0.65 mm pitch; 2.1 mm x 1.25 mm x 0.95 mm bodyOutline drawing2018-11-14
SOT886_115XSON6; Reel pack; SMD, 7" Q1/T1 Standard product orientation Orderable part number ending ,115 or X Ordering code (12NC) ending 115Packing2013-04-23
MAR_SOT886MAR_SOT886 TopmarkTop marking2013-06-03
SOT886_132XSON6; reel pack; standard product orientation; 12NC ending 132Packing2012-11-28
SOT886plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 mm bodyOutline drawing2018-11-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
aup1g373aup1g373 IBIS modelIBIS model2014-12-21

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.