74LVC2G14-Q100

Dual inverting Schmitt trigger with 5 V tolerant input

The 74LVC2G14-Q100 provides two inverting buffers with Schmitt-trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals.

The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment. Schmitt-trigger action at the inputs makes the circuit tolerant of slower input rise and fall time. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
  • Wide supply voltage range from 1.65 V to 5.5 V
  • 5 V tolerant inputs for interfacing with 5 V logic
  • High noise immunity
  • Complies with JEDEC standard:
    • JESD8-7 (1.65 V to 1.95 V)
    • JESD8-5 (2.3 V to 2.7 V)
    • JESD8B/JESD36 (2.7 V to 3.6 V)
  • ESD protection:
    • MIL-STD-883, method 3015 exceeds 2000 V
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
  • ±24 mA output drive (VCC = 3.0 V)
  • CMOS low power consumption
  • Latch-up performance exceeds 250 mA
  • Direct interface with TTL levels
  • Unlimited rise and fall times
  • Input accepts voltages up to 5 V

Target applications

  • Wave and pulse shaper
  • Astable multivibrator
  • Monostable multivibrator

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)fmax (MHz)No of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74LVC2G14GM-Q100Production1.65 - 5.5CMOS/LVTTL± 321752low-40~125274170XSON6
74LVC2G14GV-Q100Production1.65 - 5.5CMOS/LVTTL± 321752low-40~12523239.4145SC-74; TSOP6
74LVC2G14GW-Q100Production1.65 - 5.5CMOS/LVTTL± 321752low-40~12525069.0TSSOP6

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74LVC2G14GM-Q100
XSON6
(SOT886)
SOT886Reel 7" Q1/T1ActiveStandard Marking74LVC2G14GM-Q100X
( 9356 907 14115 )
74LVC2G14GV-Q100
SC-74; TSOP6
(SOT457)
SOT457Reel 7" Q3/T4, ReverseActiveV1474LVC2G14GV-Q100H
( 9353 014 04125 )
74LVC2G14GW-Q100
TSSOP6
(SOT363)
SOT363Reel 7" Q3/T4, ReverseActiveVK74LVC2G14GW-Q100H
( 9353 014 05125 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRMSLMSL leadfree
74LVC2G14GM-Q10074LVC2G14GM-Q100X74LVC2G14GM-Q100week 25, 201911
74LVC2G14GV-Q10074LVC2G14GV-Q100H74LVC2G14GV-Q100Always Pb-free123.811
74LVC2G14GW-Q10074LVC2G14GW-Q100H74LVC2G14GW-Q100Always Pb-free123.811
Quality and reliability disclaimer

Documentation (17)

File nameTitleTypeDate
74LVC2G14_Q100Dual inverting Schmitt trigger with 5 V tolerant inputData sheet2019-01-28
SOT363_165TSSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-20
SOT363_135TSSOP6; Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-20
MAR_SOT363MAR_SOT363 TopmarkTop marking2013-06-03
SOT363_115TSSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-15
SOT363plastic, surface-mounted package; 6 leads; 0.65 mm pitch; 2.1 mm x 1.25 mm x 0.95 mm bodyOutline drawing2018-11-14
SOT363_125TSSOP6 ; Reel pack for SMD, 7"; Q3/T4 product orientationPacking2020-02-14
SOT886_115XSON6; Reel pack for SMD, 7''; Q1/T1 product orientationPacking2020-02-13
SOT886_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-02-13
MAR_SOT886MAR_SOT886 TopmarkTop marking2013-06-03
SOT886plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 mm bodyOutline drawing2018-11-14
MAR_SOT457MAR_SOT457 TopmarkTop marking2013-06-03
SOT457_115TSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-30
SOT457_135Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-30
SOT457_165TSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-30
SOT457plastic, surface-mounted package (SC-74; TSOP6); 6 leadsOutline drawing2018-11-28
SOT457_125TSOP6; Reel pack for SMD, 7"; Q3/T4 product orientationPacking2020-02-26

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Ordering, pricing & availability

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.