Bipolar transistors

Diodes

ESD protection, TVS, filtering and signal conditioning

MOSFETs

SiC MOSFETs

GaN FETs

IGBTs

Analog & Logic ICs

Automotive qualified products (AEC-Q100/Q101)
NEX90530BPA-Q100

NEX90530BPA-Q100 Production

300 mA, 40 V ultra-low Iq (5.3 µA) low-dropout voltage regulator

The NEX90x30-Q100 device is a low-dropout (LDO) linear regulator designed for applications with input voltages of up to 40 V. It features a typical quiescent current (IQ) of only 5.3 μA at light load and a typical shutdown current (ISHUT) of 300 nA when disabled. This makes the device ideal for powering always-on components, such as microcontrollers (MCUs) and Controller Area Network (CAN) or Local Interconnect Network (LIN) transceivers in standby or CAN-wake systems.

In battery-powered automotive applications, low IQ and ISHUT are critical for saving energy and extending battery life. Always-on systems require ultra-low IQ across an extended temperature range to ensure sustained operation when the vehicle ignition is off. In CAN-wake systems or certain sleep modes, maintaining an ultralow ISHUT is essential to minimize battery consumption even when the system is in sleep or disabled mode.

The device features integrated protections for shortcircuit, over-current, and thermal shutdown. It operates within an ambient temperature range of -40 °C to 125 °C and a junction temperature range of -40 °C to 150 °C. Additionally, this device is available in an enhanced thermal package, HTSSOP8 and wettable flank HWSON6 (DFN-6).

Table 1. Device information
Part number Package   Body size (nom)

NEX90530-Q100

HTSSOP8

  

3.0 mm x 3.0 mm

NEX90230-Q100

HTSSOP8

  

3.0 mm x 3.0 mm

NEX90230-Q100

HWSON6

  

2.0 mm x 2.0 mm
  • Product details
  • Documentation
  • Support
  • Ordering
  • Interactive datasheet

Product details

Features and benefits

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1 (Tamb): -40 °C to 125 °C
    • Junction temperature (TJ): -40 °C to 150 °C
  • Input voltage range: 3 V to 40 V (45 V transient)
  • Output voltage range: 3.3 V and 5 V (fixed)
  • Output voltage accuracy: ±2% (max)
  • Maximum output current: 300 mA
  • Low dropout voltage:
    • 460 mV typical at 300 mA (VOUT = 5 V)
  • Low quiescent current (IQ):
    • 5.3 µA typical at light loads
    • 300 nA typical shutdown current
  • Stable with a wide range of ceramic output-stability cap:
    • ESR from 0.001 Ω to 2 Ω; output cap of 1 µF to 220 µF
  • Integrated various fault protections:
    • Thermal shutdown
    • Short-circuit and over-current protection
  • Enhanced thermal package available:
    • HTSSOP8, RθJA= 62.3 °C/W
    • HWSON6, RθJA= 66.7 °C/W

Applications

  • Body control modules (BCM)

  • Automotive lighting

  • Automotive head units & cluster

  • Telematics control units

  • EV/HEV power train

Figure 1. Typical application

Register once, drag and drop ECAD models into your CAD tool and speed up your design.

More information

Quality and reliability disclaimer

Support

Please contact us if you have any questions. If you are in need of design support, please fill in the technical support form, we will get back to you shortly.

Please visit our engineer exchange forum or contact us for further support.

Longevity

The Nexperia Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our Executive Management Team. View our longevity program here.

Sample

As a Nexperia customer you can order samples via our sales organization.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples. Check out the list of official distributors.

Interactive datasheet

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet