Nexperia
Or cross multiple parts
×

74HCT4852BQ

Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control

The 74HC4852; 74HCT4852 are dual single-pole quad-throw analog switches (SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 & S1) are common to both switches. When E is HIGH, the switches are turned off. The device features injection-current effect control. This allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel, eliminating the need for external diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Alternatives

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74HCT4852BQ 74HCT4852BQ,115 935285735115 SOT763-1 Order product

Features and benefits

  • Injection-current cross coupling < 1 mV/mA

  • Wide supply voltage range from 2.0 V to 6.0 V for 74HC4852

  • ESD protection:

    • HBM JESD22-A114E exceeds 2000 V

    • CDM JESD22-C101C exceeds 1000 V

  • Latch-up performance exceeds 100 mA per JESD 78 Class II level A

  • Low ON-state resistance:

    • 400 Ω (typical) at VCC = 2.0 V

    • 215 Ω (typical) at VCC = 3.0 V

    • 120 Ω (typical) at VCC = 3.3 V

    • 76 Ω (typical) at VCC = 4.5 V

    • 59 Ω (typical) at VCC = 6.0 V

Applications

  • Analog multiplexing and demultiplexing

  • Digital multiplexing and demultiplexing

  • Signal gating

Parametrics

Type numberProduct statusConfigurationVCC (V)Logic switching levelsRON (Ω)RON(FLAT) (Ω)f(-3dB) (MHz)THD (%)Xtalk (dB)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HCT4852BQProductionSP4T-Z4.5 - 5.5TTL240----very low-40~125804.747DHVQFN16

(-) dash denotes: "Parameter value not specified for this product"

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74HCT4852BQ74HCT4852BQ,115
( 9352 857 35115 ) 		ActiveHT4852
DHVQFN16
(SOT763-1) 		SOT763-1SOT763-1_115

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74HCT4852BQ74HCT4852BQ,11574HCT4852BQ
Quality and reliability disclaimer

Series

Documentation (5)

File nameTitleTypeDate
74HC_HCT4852Dual 4-channel analog multiplexer/demultiplexer with injection-current effect controlData sheet2020-04-29
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
74HCT4852BQ_Nexperia_Product_Reliability74HCT4852BQ Nexperia Product ReliabilityQuality document2023-05-29
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SOT763-1_115DHVQFN16; Reel pack, SMD, 7" Q1/T1 product orientationPacking information2020-02-13

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74HCT4852BQ74HCT4852BQ,115935285735115SOT763-1_115- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet