×

74HCT163D

Presettable synchronous 4-bit binary counter; synchronous reset

The 74HC163; 74HCT163 is a synchronous presettable binary counter with an internal look-head carry. Synchronous operation is provided by having all flip-flops clocked simultaneously on the positive-going edge of the clock (CP). The outputs (Q0 to Q3) of the counters may be preset to a HIGH or LOW. A LOW at the parallel enable input (PE) disables the counting action. It causes the data at the data inputs (D0 to D3) to be loaded into the counter on the positive-going edge of the clock. Preset takes place regardless of the levels at count enable inputs (CEP and CET). A LOW at the master reset input (MR) sets Q0 to Q3 LOW after the next positive-going transition on the clock input (CP). This action occurs regardless of the levels at input pins PE, CET and CEP. This synchronous reset feature enables the designer to modify the maximum count with only one external NAND gate. The look-ahead carry simplifies serial cascading of the counters. Both CEP and CET must be HIGH to count. The CET input is fed forward to enable the terminal count output (TC). The TC output thus enabled will produce a HIGH output pulse of a duration approximately equal to a HIGH output of Q0. This pulse can be used to enable the next cascaded stage. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

The CP to TC propagation delay and CEP to CP set-up time determine the maximum clock frequency for the cascaded counters according to the following formula:

fmax= (1) / (tP (max)(CP to TC) + tSU(CEP to CP) )

This product has been discontinued, click here for discontinuation information and replacement parts.

Features and benefits

  • Complies with JEDEC standard no. 7A

  • Input levels:

    • For 74HC163: CMOS level

    • For 74HCT163: TTL level

  • Synchronous counting and loading

  • 2 count enable inputs for n-bit cascading

  • Synchronous reset

  • Positive-edge triggered clock

  • ESD protection:

    • HBM JESD22-A114F exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

  • Multiple package options

  • Specified from ‑40 °C to +85 °C and ‑40 °C to +125 °C

Applications

  • Television sets

  • Home-sound sets

  • Multimedia systems

  • All mains fed audio systems

  • Car audio (boosters)

Parametrics

Type number Product status VCC (V) Output drive capability (mA) Logic switching levels tpd (ns) Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
74HCT163D End of life 4.5 - 5.5 ± 4 TTL 20 low -40~125 83 5.2 41 SO16

PCB Symbol, Footprint and 3D Model

Model Name Description

Package

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number, (Ordering code (12NC)) Status Marking Package Package information Reflow-/Wave soldering Packing
74HCT163D 74HCT163D,652
(933715020652)
Withdrawn / End-of-life 74HCT163D SOT109-1
SO16
(SOT109-1)
SOT109-1 SO-SOJ-REFLOW
SO-SOJ-WAVE
WAVE_BG-BD-1
SOT109-1_652
74HCT163D,653
(933715020653)
Withdrawn / End-of-life 74HCT163D Not available

Environmental information

All type numbers in the table below are discontinued. See the table Discontinuation information for more information.

Type number Orderable part number Chemical content RoHS RHF-indicator
74HCT163D 74HCT163D,652 74HCT163D rohs rhf rhf
74HCT163D 74HCT163D,653 74HCT163D rohs rhf rhf
Quality and reliability disclaimer

Documentation (17)

File name Title Type Date
74HC_HCT163 Presettable synchronous 4-bit binary counter; synchronous reset Data sheet 2018-10-12
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
hc HC/HCT Spice model SPICE model 2022-02-17
HCT_USER_GUIDE HC/T User Guide User manual 1997-10-31
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SO16_SOT109-1_mk plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.35 mm body Marcom graphics 2017-01-28
SOT109-1_112 SO16; Tube pack; Standard product orientation Packing information 2021-09-10
SOT109-1_118 SO16; Reel pack for SMD, 13"; Q1/T1 product orientation Packing information 2024-02-19
SOT109-1_139 SO16; Reel pack for SMD, 13"; Q4/T2 product orientation Packing information 2024-02-19
SOT109-1_431 SO16; Reel sulfur barrier pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending ,431 or Z Ordering code (12NC) ending 431 Packing information 2020-04-27
SOT109-1_652 SO16; Tube pack; Standard product orientation Packing information 2021-09-10
SO-SOJ-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SO-SOJ-WAVE Footprint for wave soldering Wave soldering 2009-10-08
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08

Support

If you are in need of design/technical support, let us know and fill in the answer form we'll get back to you shortly.

Models

File name Title Type Date
hc HC/HCT Spice model SPICE model 2022-02-17
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name Description

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.