74AXP1T125

Dual supply buffer/line driver; 3-state

The 74AXP1T125 is a dual supply non-inverting buffer/line driver with 3-state output. It features one input (A), an output (Y), an output enable input (OE) and dual supply pins (VCCI and VCCO). A HIGH level at pin OE causes the output to assume a high-impedance OFF-state. The inputs are referenced to VCCI and the output is referenced to VCCO. All inputs can be connected directly to VCCI or GND. VCCI can be supplied at any voltage between 0.7 V and 2.75 V and VCCO can be supplied at any voltage between 1.2 V and 5.5 V. This feature allows voltage level translation.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This device ensures very low static and dynamic power consumption across the entire supply range and is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

Features

  • Wide supply voltage range:
    • VCCI: 0.7 V to 2.75 V
    • VCCO: 1.2 V to 5.5 V
  • Low input capacitance; CI = 0.6 pF (typical)
  • Low output capacitance; CO = 1.8 pF (typical)
  • Low dynamic power consumption; CPD = 0.4 pF at VCCI = 1.2 V (typical)
  • Low dynamic power consumption; CPD = 7.1 pF at VCCO = 3.3 V (typical)
  • Low static power consumption; ICCI = 0.5 μA (85 °C maximum)
  • Low static power consumption; ICCO = 1.8 μA (85 °C maximum)
  • High noise immunity
  • Complies with JEDEC standard:
    • JESD8-12A.01 (1.1 V to 1.3 V; A, OE inputs)
    • JESD8-11A.01 (1.4 V to 1.6 V)
    • JESD8-7A (1.65 V to 1.95 V)
    • JESD8-5A.01 (2.3 V to 2.7 V)
    • JESD8-C (2.7 V to 3.6 V; Y output)
    • JESD12-6 (4.5 V to 5.5 V; Y output)
  • ESD protection:
    • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV
    • CDM JESD22-C101E exceeds 1000 V
  • Latch-up performance exceeds 100 mA per JESD78D Class II
  • Inputs accept voltages up to 2.75 V
  • Low noise overshoot and undershoot < 10% of VCCO
  • IOFF circuitry provides partial power-down mode operation
  • Multiple package options
  • Specified from -40 °C to +85 °C

Parametrics

Type numberProduct statusVCC(A) (V)VCC(B) (V)Logic switching levelsOutput drive capability (mA)tpd (ns)No of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AXP1T125GMProduction0.7 - 2.751.2 - 5.5CMOS± 124.71ultra low-40~1253057.3153.6XSON6
74AXP1T125GNProduction0.7 - 2.751.2 - 5.5CMOS± 124.71ultra low-40~12531619.3196XSON6
74AXP1T125GSProduction0.7 - 2.751.2 - 5.5CMOS± 124.71ultra low-40~12530624.5203XSON6

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74AXP1T125GM
XSON6
(SOT886)
SOT886Reel 7" Q3/T4, ReverseActiveStandard Marking74AXP1T125GMH
( 9353 069 85125 )
74AXP1T125GN
XSON6
(SOT1115)
SOT1115Reel 7" Q3/T4, ReverseActiveStandard Marking74AXP1T125GNH
( 9353 069 86125 )
74AXP1T125GS
XSON6
(SOT1202)
SOT1202Reel 7" Q3/T4, ReverseActiveStandard Marking74AXP1T125GSH
( 9353 069 87125 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateMSLMSL leadfree
74AXP1T125GM74AXP1T125GMH74AXP1T125GMAlways Pb-free11
74AXP1T125GN74AXP1T125GNH74AXP1T125GNAlways Pb-free11
74AXP1T125GS74AXP1T125GSH74AXP1T125GSAlways Pb-free11
Quality and reliability disclaimer

Documentation (15)

File nameTitleTypeDate
74AXP1T125Dual supply buffer/line driver; 3-stateData sheet2019-03-22
Nexperia_document_guide_Logic_translators_201711Nexperia Logic TranslatorsBrochure2017-12-05
axp1t12574AXP1T125 IBIS modelIBIS model2016-03-01
Nexperia_document_leaflet_Logic_AXP_technology_portfolio_201904AXP – Extremely low-power logic technology portfolioLeaflet2019-04-05
nexperia_selection_guide_2019_201901Selection guide 2019. Discretes, Logic and MOSFETsSelection guide2018-12-12
MAR_SOT1202MAR_SOT1202 TopmarkTop marking2013-06-03
SOT1202_132Reversed product orientation 12NC ending 132Packing2013-04-04
SOT1202plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1mm x 0.35 mm bodyOutline drawing2018-11-14
MAR_SOT1115MAR_SOT1115 TopmarkTop marking2013-06-03
SOT1115_132Reversed product orientation 12NC ending 132Packing2013-04-04
SOT1115plastic, leadless extremely thin small outline package; 6 terminals; 0.3 mm pitch; 0.9 mm x 1 mm x 0.35 mm bodyOutline drawing2018-11-14
SOT886_115XSON6; Reel pack; SMD, 7" Q1/T1 Standard product orientation Orderable part number ending ,115 or X Ordering code (12NC) ending 115Packing2013-04-23
MAR_SOT886MAR_SOT886 TopmarkTop marking2013-06-03
SOT886_132XSON6; reel pack; standard product orientation; 12NC ending 132Packing2012-11-28
SOT886plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 mm bodyOutline drawing2018-11-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
axp1t12574AXP1T125 IBIS modelIBIS model2016-03-01

Ordering, pricing & availability

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.