74AUP1G175

Low-power D-type flip-flop with reset; positive-edge trigger

The 74AUP1G175 provides a low-power, low-voltage positive-edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The D input must be stable one set-up time prior to the LOW-to-HIGH clock transition, for predictable operation.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

Features

  • Wide supply voltage range from 0.8 V to 3.6 V
  • High noise immunity
  • Complies with JEDEC standards:
    • JESD8-12 (0.8 V to 1.3 V)
    • JESD8-11 (0.9 V to 1.65 V)
    • JESD8-7 (1.2 V to 1.95 V)
    • JESD8-5 (1.8 V to 2.7 V)
    • JESD8-B (2.7 V to 3.6 V)
  • ESD protection:
    • HBM JESD22-A114F Class 3A exceeds 5000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Low static power consumption; ICC = 0.9 μA (maximum)
  • Latch-up performance exceeds 100 mA per JESD 78 Class II
  • Inputs accept voltages up to 3.6 V
  • Low noise overshoot and undershoot < 10 % of VCC
  • IOFF circuitry provides partial Power-down mode operation
  • Multiple package options
  • Specified from -40 ℃ to +85 ℃ and -40 ℃ to +125 ℃

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AUP1G175GF
NRND
Not for design in1.1 - 3.6CMOS+/- 1.97.470ultra low-40~1252906.5145XSON6
74AUP1G175GMProduction1.1 - 3.6CMOS± 1.97.470ultra low-40~1252906.5145XSON6
74AUP1G175GNProduction1.1 - 3.6CMOS± 1.97.470ultra low-40~12527511.7171XSON6
74AUP1G175GSProduction1.1 - 3.6CMOS± 1.97.470ultra low-40~12527214.8177XSON6
74AUP1G175GWProduction1.1 - 3.6CMOS± 1.97.470ultra low-40~12526438.6153TSSOP6

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74AUP1G175GF
NRND

XSON6
(SOT891)
SOT891Reel 7" Q1/T1, Q3/T4ActiveaT74AUP1G175GF,132
( 9352 813 34132 )
74AUP1G175GM
XSON6
(SOT886)
SOT886Reel 7" Q1/T1ActiveaT74AUP1G175GM,115
( 9352 800 04115 )
Reel 7" Q1/T1, Q3/T4ActiveaT74AUP1G175GM,132
( 9352 800 04132 )
74AUP1G175GN
XSON6
(SOT1115)
SOT1115Reel 7" Q1/T1, Q3/T4ActiveaT74AUP1G175GN,132
( 9352 917 28132 )
74AUP1G175GS
XSON6
(SOT1202)
SOT1202Reel 7" Q1/T1, Q3/T4ActiveaT74AUP1G175GS,132
( 9352 928 53132 )
74AUP1G175GW
TSSOP6
(SOT363)
SOT363Reel 7" Q3/T4, ReverseActiveaT74AUP1G175GW,125
( 9352 800 03125 )

Discontinuation information

Type numberOrderable part number, (Ordering code (12NC))Last time buy dateLast time delivery dateReplacement productStatusComments
74AUP1G175GM935280004114

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFRMTBF (hour)MSLMSL leadfree
74AUP1G175GF
NRND
74AUP1G175GF,13274AUP1G175GFAlways Pb-free11
74AUP1G175GM74AUP1G175GM,11574AUP1G175GMAlways Pb-free0.03.293.04E811
74AUP1G175GM74AUP1G175GM,13274AUP1G175GMAlways Pb-free0.03.293.04E811
74AUP1G175GN74AUP1G175GN,13274AUP1G175GNAlways Pb-free11
74AUP1G175GS74AUP1G175GS,13274AUP1G175GSAlways Pb-free11
74AUP1G175GW74AUP1G175GW,12574AUP1G175GWAlways Pb-free0.03.293.04E811
Quality and reliability disclaimer

Documentation (25)

File nameTitleTypeDate
74AUP1G175Low-power D-type flip-flop with reset; positive-edge triggerData sheet2017-05-03
AN10161PicoGate Logic footprintsApplication note2002-10-29
AN11052Pin FMEA for AUP familyApplication note2019-01-09
aup1g175aup1g175 IBIS modelIBIS model2014-12-21
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Leaflet2019-04-12
Nexperia_Selection_guide_2020Nexperia Selection Guide 2020Selection guide2020-01-31
SOT1202_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-01-13
MAR_SOT1202MAR_SOT1202 TopmarkTop marking2013-06-03
SOT1202plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1mm x 0.35 mm bodyOutline drawing2018-11-14
SOT1115_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-02-14
MAR_SOT1115MAR_SOT1115 TopmarkTop marking2013-06-03
SOT1115plastic, leadless extremely thin small outline package; 6 terminals; 0.3 mm pitch; 0.9 mm x 1 mm x 0.35 mm bodyOutline drawing2018-11-14
SOT891_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-02-13
MAR_SOT891MAR_SOT891 TopmarkTop marking2013-06-03
SOT891plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1 mm x 0.5 mm bodyOutline drawing2018-11-14
SOT363_165TSSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-20
SOT363_135TSSOP6; Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-20
MAR_SOT363MAR_SOT363 TopmarkTop marking2013-06-03
SOT363_115TSSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-15
SOT363plastic, surface-mounted package; 6 leads; 0.65 mm pitch; 2.1 mm x 1.25 mm x 0.95 mm bodyOutline drawing2018-11-14
SOT363_125TSSOP6 ; Reel pack for SMD, 7"; Q3/T4 product orientationPacking2020-02-14
SOT886_115XSON6; Reel pack for SMD, 7''; Q1/T1 product orientationPacking2020-02-13
SOT886_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-02-13
MAR_SOT886MAR_SOT886 TopmarkTop marking2013-06-03
SOT886plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 mm bodyOutline drawing2018-11-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
aup1g175aup1g175 IBIS modelIBIS model2014-12-21

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.