×

HEF4013B

Dual D-type flip-flop

The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD.

Features and benefits

  • Wide supply voltage range from 3.0 V to 15.0 V
  • CMOS low power dissipation
  • High noise immunity
  • Tolerant of slow clock rise and fall times
  • Fully static operation
  • 5 V, 10 V, and 15 V parametric ratings
  • Standardized symmetrical output characteristics
  • Specified from -40 °C to +125 °C
  • Complies with JEDEC standard JESD 13-B
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-B exceeds 200 V

Applications

  • Counters and dividers
  • Registers
  • Toggle flip-flops

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
HEF4013BTProduction4.5 - 15.5CMOS± 2.43040low-40~8510518.364SO14
HEF4013BTTProduction4.5 - 15.5CMOS± 2.43040low-40~851397.165TSSOP14

Package

Type numberPackagePackage informationReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
HEF4013BT
SO14
(SOT108-1)
SOT108-1SO-SOJ-REFLOW
SO-SOJ-WAVE
Reel 13" Q1/T1 CECCActiveHEF4013BTHEF4013BT,653
( 9333 726 60653 )
HEF4013BTT
TSSOP14
(SOT402-1)
SOT402-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveEF4013BHEF4013BTT,118
( 9352 830 39118 )

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberPackagePackage informationReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
HEF4013BT
SO14
(SOT108-1)
SOT108-1SO-SOJ-REFLOW
SO-SOJ-WAVE
Bulk Pack, CECCDiscontinued / End-of-lifeHEF4013BTHEF4013BT,652
( 9333 726 60652 )
HEF4013BTT
TSSOP14
(SOT402-1)
SOT402-1SSOP-TSSOP-VSO-WAVE
Bulk PackDiscontinued / End-of-lifeEF4013BHEF4013BTT,112
( 9352 830 39112 )

Discontinuation information

Type numberOrderable part number, (Ordering code (12NC))Last time buy dateLast time delivery dateReplacement productStatusComments
HEF4013BT9333726606522021-12-312022-06-30HEF4013BT
    HEF4013BTT9352830391122021-12-312022-06-30HEF4013BTT

      Quality, reliability & chemical content

      Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFRMTBF (hour)MSLMSL leadfree
      HEF4013BTHEF4013BT,653HEF4013BTweek 13, 200565.01.28.33E811
      HEF4013BTTHEF4013BTT,118HEF4013BTTAlways Pb-free65.01.28.33E811

      The variants in the table below are discontinued. See the table Discontinuation information for more information.

      Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFRMTBF (hour)MSLMSL leadfree
      HEF4013BTHEF4013BT,652HEF4013BTweek 13, 200565.01.28.33E811
      HEF4013BTTHEF4013BTT,112HEF4013BTTAlways Pb-free65.01.28.33E811
      Quality and reliability disclaimer

      Documentation (10)

      File nameTitleTypeDate
      HEF4013BDual D-type flip-flopData sheet2021-11-23
      AN11051Pin FMEA HEF4000 familyApplication note2019-01-09
      Nexperia_Selection_guide_2020Nexperia Selection Guide 2020Selection guide2020-01-31
      Nexperia_Selection_guide_2021Nexperia Selection Guide 2021Selection guide2021-01-08
      SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
      SOT402-1plastic, thin shrink small outline package; 14 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm bodyPackage information2020-04-21
      SO-SOJ-WAVEFootprint for wave solderingWave soldering2009-10-08
      SO-SOJ-REFLOWFootprint for reflow solderingReflow soldering2009-10-08
      SOT108-1plastic, small outline package; 14 leads; 1.27 mm pitch; 8.65 mm x 3.9 mm x 1.75 mm bodyPackage information2021-01-06
      WAVE_BG-BD-1Wave soldering profileWave soldering2021-09-08

      Support

      If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

      Ordering, pricing & availability

      Sample

      As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

      Sample orders normally take 2-4 days for delivery.

      If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.