NXB0104-Q100

Dual supply translating transceiver; auto direction sensing; 3-state

The NXB0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.2V and 3.6V and VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V, making the device suitable for translating between any of the low voltage nodes (1.2V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
  • Wide supply voltage range:
    • VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V
  • IOFF circuitry provides partial Power-down mode operation
  • Inputs accept voltages up to 5.5 V
  • ESD protection:
    • HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port
    • HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port
    • CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV
    • MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port
    • MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port
  • Latch-up performance exceeds 100 mA per JESD 78B Class II

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsfmax (MHz)Power dissipation considerationsPackage name
NXB0104BQ-Q100Production1.2 - 3.6CMOS4lowDHVQFN14
NXB0104PW-Q100Production1.2 - 3.6CMOS4lowTSSOP14

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
NXB0104BQ-Q100
DHVQFN14
(SOT762-1)
SOT762-1Reel 7" Q1/T1ActiveStandard MarkingNXB0104BQ-Q100X
( 9356 908 81115 )
NXB0104PW-Q100
TSSOP14
(SOT402-1)
SOT402-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveStandard MarkingNXB0104PW-Q100J
( 9356 908 79118 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateMSLMSL leadfree
NXB0104BQ-Q100NXB0104BQ-Q100XNXB0104BQ-Q100week 25, 201911
NXB0104PW-Q100NXB0104PW-Q100JNXB0104PW-Q100week 25, 201911
Quality and reliability disclaimer

Documentation (10)

File nameTitleTypeDate
NXB0104_Q100Dual supply translating transceiver; auto direction sensing; 3-stateData sheet2019-09-12
nxb0104NXB0104 IBIS modelIBIS model2019-09-12
SOT762-1_471DHVQFN14; Reel sulfur barrier pack, SMD, 7" Q1/T1 standard product orientation Orderable part number ending ,471 or Z Ordering code (12NC) ending 471Packing2016-01-21
SOT762-1plastic, leadless dual in-line compatible thermal enhanced very thin quad flat package; 14 terminals; 0.5 mm pitch; 3 mm x 2.5 mm x 1 mm bodyOutline drawing2018-11-14
SOT762-1_115DHVQFN14; Reel pack for SMD, 7"; Q1/T1 product orientationPacking2020-02-13
SOT402-1_623TSSOP14; Reel pack; SMD, 13"; Q1 Standard product orientation; Orderable part number ending, 623 or XP; Ordering code (12NC) ending 623Packing2013-05-15
SOT402-1_653TSSOP14; Reel pack; SMD, 13"; Q1 Standard product orientation; Orderable part number ending, 653 or HL; Ordering code (12NC) ending 653Packing2013-05-15
SOT402-1plastic, thin shrink small outline package; 14 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm bodyOutline drawing2018-10-18
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT402-1_118TSSOP14; Reel pack for SMD, 13"; Q1/T1 product orientationPacking2019-11-29

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
nxb0104NXB0104 IBIS modelIBIS model2019-09-12

Ordering, pricing & availability

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.