×

74ALVT16823DGG

18-bit bus-interface D-type flip-flop with reset and enable; 3-state

The 74ALVT16823 is an 18-bit positive-edge triggered D-type flip-flop with 3-state outputs, reset and enable.

The device can be used as two 9-bit flip-flops or one 18-bit flip-flop. The device features clock (nCP), clock enable (nCE), master reset (nMR) and output enable (nOE, inputs each controlling 9-bits. When nCE is LOW, the flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (nCP) transition. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Operation of the nOE input does not affect the state of the flip-flops. A LOW on nMR will reset the flip-flops LOW. Bus hold data inputs eliminate the need for external pull-up resistors to define unused inputs

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74ALVT16823DGG 74ALVT16823DGG,118 935261019118 SOT364-1 Order product

Features and benefits

  • Wide supply voltage range from 2.3 V to 3.6 V

  • Overvoltage tolerant inputs to 5.5 V

  • BiCMOS high speed and output drive

  • Direct interface with TTL levels

  • Bus hold on data inputs

  • Power-up 3-state

  • IOFF circuitry provides partial Power-down mode operation

  • Two sets of high speed parallel registers with positive edge-triggered D-type flip-flops

  • Ideal where high speed, light loading, or increased fan-in are required with MOS microprocessors

  • Live insertion and extraction permitted

  • Power-up reset

  • No bus current loading when output is tied to 5 V bus

  • Output capability: +64 mA to -32 mA

  • Latch-up performance exceeds 500 mA per JESD 78 Class II Level B

  • ESD protection:

    • MIL STD 883, method 3015: exceeds 2000 V

    • MM: exceeds 200 V

  • Specified from -40 °C to 85 °C

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Package name
74ALVT16823DGGProduction2.3 - 3.6TTL-32/+641.9250medium-40~859321.0TSSOP56

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74ALVT16823DGG74ALVT16823DGG,118
( 9352 610 19118 )
ActiveALVT16823
TSSOP56
(SOT364-1)
SOT364-1SSOP-TSSOP-VSO-WAVE
SOT364-1_118

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74ALVT16823DGG74ALVT16823DGGY
( 9352 610 19518 )
Discontinued / End-of-lifeALVT16823
TSSOP56
(SOT364-1)
SOT364-1SSOP-TSSOP-VSO-WAVE
SOT364-1_518

Discontinuation information

Type numberOrderable part numberOrdering codeLast time buy dateLast time delivery dateReplacement productStatusComments
74ALVT16823DGG74ALVT16823DGGY935261019518

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74ALVT16823DGG74ALVT16823DGG,11874ALVT16823DGG

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74ALVT16823DGG74ALVT16823DGGY74ALVT16823DGG
Quality and reliability disclaimer

Documentation (6)

File nameTitleTypeDate
74ALVT1682318-bit bus-interface D-type flip-flop with reset and enable; 3-stateData sheet2020-10-20
alvt16823alvt16823 IBIS modelIBIS model2013-04-07
74ALVT16823DGG_Nexperia_Product_Reliability74ALVT16823DGG Nexperia Product ReliabilityQuality document2023-05-29
alvt16alvt16 Spice modelSPICE model2013-05-06
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT364-1_118TSSOP56; Reel pack for SMD, 13"; Q1/T1 product orientationPacking information2020-02-26

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
alvt16823alvt16823 IBIS modelIBIS model2013-04-07
alvt16alvt16 Spice modelSPICE model2013-05-06

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74ALVT16823DGG74ALVT16823DGG,118935261019118SOT364-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.