Nexperia
Or cross multiple parts
×

74HCT374PW

Octal D-type flip-flop; positive edge-trigger; 3-state

The 74HC374; 74HCT374 is an octal positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs also include clamp diodes, this enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74HCT374PW 74HCT374PW,118 935174880118 SOT360-1 Order product

Features and benefits

  • Wide supply voltage range from 2.0 to 6.0 V

  • CMOS low power dissipation

  • High noise immunity

  • Input levels:

    • For 74HC374: CMOS level

    • For 74HCT374: TTL level

  • Octal bus interface

  • Non-inverting 3-state outputs

  • 8-bit positive, edge-triggered register

  • Common 3-state output enable input

  • Independent register and 3-state buffer operation

  • Complies with JEDEC standards

    • JESD8C (2.7 V to 3.6 V)

    • JESD7A (2.0 V to 6.0 V)

  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

  • ESD protection:

    • HBM JESD22-A114F exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HCT374PWProduction4.5 - 5.5TTL± 61348low-40~1251004.644.6TSSOP20

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74HCT374PW74HCT374PW,118
( 9351 748 80118 ) 		ActiveHCT374
TSSOP20
(SOT360-1) 		SOT360-1SSOP-TSSOP-VSO-WAVE
SOT360-1_118

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
74HCT374PW74HCT374PW,112
( 9351 748 80112 ) 		Withdrawn / End-of-lifeHCT374
TSSOP20
(SOT360-1) 		SOT360-1SSOP-TSSOP-VSO-WAVE
SOT360-1_112

Discontinuation information

Type numberOrderable part numberOrdering codeLast time buy dateLast time delivery dateReplacement productStatusComments
74HCT374PW74HCT374PW,1129351748801122021-12-312022-06-3074HCT374PWVersion withdrawal

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74HCT374PW74HCT374PW,11874HCT374PW

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part numberChemical contentRoHSRHF-indicator
74HCT374PW74HCT374PW,11274HCT374PW
Quality and reliability disclaimer

Series

Documentation (6)

File nameTitleTypeDate
74HC_HCT374Octal D-type flip-flop; positive edge-trigger; 3-stateData sheet2021-09-07
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
74HCT374PW_Nexperia_Product_Reliability74HCT374PW Nexperia Product ReliabilityQuality document2023-05-29
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT360-1_118TSSOP20; Reel pack for SMD, 13''; Q1/T1 product orientationPacking information2023-08-30

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
74HCT374PW74HCT374PW,118935174880118SOT360-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

Interactive datasheet