×

HEF4013BTT

Dual D-type flip-flop

The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower clock rise and fall times.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
HEF4013BTT HEF4013BTT,118 935283039118 SOT402-1 Order product

Features and benefits

  • Wide supply voltage range from 3.0 V to 15.0 V

  • CMOS low power dissipation

  • High noise immunity

  • Tolerant of slow clock rise and fall times

  • Fully static operation

  • 5 V, 10 V, and 15 V parametric ratings

  • Standardized symmetrical output characteristics

  • Specified from -40 °C to +125 °C

  • Complies with JEDEC standard JESD 13-B

  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V

    • MM JESD22-A115-B exceeds 200 V

Applications

  • Counters and dividers

  • Registers

  • Toggle flip-flops

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
HEF4013BTTProduction3.0 - 15CMOS± 2.43040low-40~851397.165TSSOP14

PCB Symbol, Footprint and 3D Model

Model NameDescription

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
HEF4013BTTHEF4013BTT,118
( 9352 830 39118 )
ActiveEF4013B
TSSOP14
(SOT402-1)
SOT402-1SSOP-TSSOP-VSO-WAVE
SOT402-1_118

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackagePackage informationReflow-/Wave solderingPacking
HEF4013BTTHEF4013BTT,112
( 9352 830 39112 )
Withdrawn / End-of-lifeEF4013B
TSSOP14
(SOT402-1)
SOT402-1SSOP-TSSOP-VSO-WAVE
SOT402-1_112

Discontinuation information

Type numberOrderable part numberOrdering codeLast time buy dateLast time delivery dateReplacement productStatusComments
HEF4013BTTHEF4013BTT,1129352830391122021-12-312022-06-30HEF4013BTTVersion withdrawal

Environmental information

Type numberOrderable part numberChemical contentRoHSRHF-indicator
HEF4013BTTHEF4013BTT,118HEF4013BTT

The variants in the table below are discontinued. See the table Discontinuation information for more information.

Type numberOrderable part numberChemical contentRoHSRHF-indicator
HEF4013BTTHEF4013BTT,112HEF4013BTT
Quality and reliability disclaimer

Documentation (5)

File nameTitleTypeDate
HEF4013BDual D-type flip-flopData sheet2023-03-09
AN11051Pin FMEA HEF4000 familyApplication note2019-01-09
HEF4013BTT_Nexperia_Product_ReliabilityHEF4013BTT Nexperia Product ReliabilityQuality document2023-05-29
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT402-1_118TSSOP14; Reel pack for SMD, 13"; Q1/T1 product orientationPacking information2019-11-29

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

PCB Symbol, Footprint and 3D Model

Model NameDescription

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingPacking quantityBuy online
HEF4013BTTHEF4013BTT,118935283039118SOT402-1_118- Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.