74LVC374A

Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state

The 74LVC374A is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. A clock input (CP) and an outputs enable input (OE) are common to all flip-flops.

The eight flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW-to-HIGH CP transition.

When pin OE is LOW, the contents of the eight flip-flops is available at the outputs. When pin OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.

Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3 V and 5 V applications.

The 74LVC374A is functionally identical to the 74LVC574A, but has a different pin arrangement.

Features

  • 5 V tolerant inputs/outputs; for interfacing with 5 V logic
  • Wide supply voltage range from 1.2 V to 3.6 V
  • CMOS low power consumption
  • Direct interface with TTL levels
  • High-impedance when VCC = 0 V
  • 8-bit positive edge-triggered register
  • Independent register and 3-state buffer operation
  • Complies with JEDEC standard:
    • JESD8-7A (1.65 V to 1.95 V)
    • JESD8-5A (2.3 V to 2.7 V)
    • JESD8-C/JESD36 (2.7 V to 3.6 V)
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-B exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74LVC374ABQProduction1.2 - 3.6CMOS/LVTTL± 242.7100low-40~125789.049DHVQFN20
74LVC374ADProduction1.2 - 3.6CMOS/LVTTL± 242.7100low-40~1258527.161SO20
74LVC374ADB
NRND
Not for design in1.2 - 3.6CMOS/LVTTL+/- 242.7100low-40~12513640.0SSOP20
74LVC374APWProduction1.2 - 3.6CMOS/LVTTL± 242.7100low-40~1251014.645TSSOP20

Package

Type numberPackagePackage informationReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74LVC374ABQ
DHVQFN20
(SOT764-1)
SOT764-1Reel 7" Q1/T1ActiveLVC374A74LVC374ABQ,115
( 9352 734 79115 )
74LVC374AD
SO20
(SOT163-1)
SOT163-1Reel 13" Q1/T1Active74LVC374AD74LVC374AD,118
( 9352 186 60118 )
Bulk PackActive74LVC374AD74LVC374AD,112
( 9352 186 60112 )
74LVC374ADB
NRND

SSOP20
(SOT339-1)
SOT339-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveLVC374A74LVC374ADB,118
( 9352 186 70118 )
Bulk PackActiveLVC374A74LVC374ADB,112
( 9352 186 70112 )
74LVC374APW
TSSOP20
(SOT360-1)
SOT360-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveLVC374A74LVC374APW,118
( 9352 186 80118 )
Bulk PackActiveLVC374A74LVC374APW,112
( 9352 186 80112 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFRMTBF (hour)MSLMSL leadfree
74LVC374ABQ74LVC374ABQ,11574LVC374ABQAlways Pb-free123.83.872.58E811
74LVC374AD74LVC374AD,11874LVC374ADweek 30, 2004123.83.872.58E811
74LVC374AD74LVC374AD,11274LVC374ADweek 30, 2004123.83.872.58E811
74LVC374ADB
NRND
74LVC374ADB,11874LVC374ADBweek 17, 200511
74LVC374ADB
NRND
74LVC374ADB,11274LVC374ADBweek 17, 200511
74LVC374APW74LVC374APW,11874LVC374APWweek 7, 2005123.83.872.58E811
74LVC374APW74LVC374APW,11274LVC374APWweek 7, 2005123.83.872.58E811
Quality and reliability disclaimer

Documentation (11)

File nameTitleTypeDate
74LVC374AOctal D-type flip-flop; 5 V tolerant inputs/outputs; positive-edge trigger; 3-stateData sheet2017-07-20
AN11009Pin FMEA for LVC familyApplication note2019-01-09
lvc374alvc374a IBIS modelIBIS model2013-04-07
Nexperia_Selection_guide_2020Nexperia Selection Guide 2020Selection guide2020-01-31
lvclvc Spice modelSPICE model2013-05-06
SOT764-1plastic, leadless dual in-line compatible thermal enhanced very thin quad flat package; 20 terminals; 0.5 mm pitch; 4.5 mm x 2.5 mm x 1 mm bodyPackage information2020-04-21
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT360-1plastic, thin shrink small outline package; 20 leads; 0.65 mm pitch; 6.5 mm x 4.4 mm x 1.1 mm bodyPackage information2020-04-21
SOT163-1plastic, small outline package; 20 leads; 1.27 mm pitch; 12.8 mm x 7.5 mm x 2.65 mm bodyPackage information2020-04-21
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT339-1plastic, shrink small outline package; 20 leads; 0.65 mm pitch; 7.2 mm x 5.3 mm x 2 mm bodyPackage information2020-04-21

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
lvc374alvc374a IBIS modelIBIS model2013-04-07
lvclvc Spice modelSPICE model2013-05-06

Ordering, pricing & availability

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.