74AHC374-Q100; 74AHCT374-Q100

Octal D-type flip-flop; positive-edge trigger; 3-state

The 74AHC374-Q100; 74AHCT374-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A.

The 74AHC374-Q100; 74AHCT374-Q100 comprises eight D-type flip-flops featuring separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications. A clock input (CP) and an output enable input (OE) are common to all flip-flops.

The eight flip-flops will store the state of their individual D inputs that meet the set-up and hold times requirements for the LOW-to-HIGH CP transition.

When OE is LOW the content of the eight flip-flops is available at the outputs. When OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from ‑40 °C to +85 °C and from ‑40 °C to +125 °C
  • Balanced propagation delays
  • All inputs have Schmitt-trigger actions
  • Inputs accept voltages higher than VCC
  • Common 3-state output enable input
  • Input levels:
    • For 74AHC374-Q100: CMOS level
    • For 74AHCT374-Q100: TTL level
  • ESD protection:
    • MIL-STD-883, method 3015 exceeds 2000 V
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
  • Multiple package options

Target applications

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AHC374D-Q100Production2.0 - 5.5CMOS± 84.4185low-40~1258427.061SO20
74AHC374PW-Q100Production2.0 - 5.5CMOS± 84.4185low-40~1251014.544TSSOP20
74AHCT374D-Q100Production4.5 - 5.5TTL± 84.3140low-40~1258427.061SO20
74AHCT374PW-Q100Production4.5 - 5.5TTL± 84.3140low-40~1251014.544TSSOP20

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74AHC374D-Q100
SO20
(SOT163-1)
SOT163-1Reel 13" Q1/T1Active74AHC374D74AHC374D-Q100J
( 9353 013 76118 )
74AHC374PW-Q100
TSSOP20
(SOT360-1)
SOT360-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveAHC37474AHC374PW-Q100J
( 9353 012 03118 )
74AHCT374D-Q100
SO20
(SOT163-1)
SOT163-1Reel 13" Q1/T1Active74AHCT374D74AHCT374D-Q100J
( 9353 033 92118 )
74AHCT374PW-Q100
TSSOP20
(SOT360-1)
SOT360-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveAHCT37474AHCT374PW-Q100J
( 9353 013 87118 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRMSLMSL leadfree
74AHC374D-Q10074AHC374D-Q100J74AHC374D-Q100Always Pb-free84.911
74AHC374PW-Q10074AHC374PW-Q100J74AHC374PW-Q100Always Pb-free84.911
74AHCT374D-Q10074AHCT374D-Q100J74AHCT374D-Q100Always Pb-free84.911
74AHCT374PW-Q10074AHCT374PW-Q100J74AHCT374PW-Q100Always Pb-free84.911
Quality and reliability disclaimer

Documentation (10)

File nameTitleTypeDate
74AHC_AHCT374_Q100Octal D-type flip-flop; positive edge-trigger; 3-stateData sheet2017-04-07
ahc374ahc374 IBIS modelIBIS model2013-04-07
ahct374ahct374 IBIS modelIBIS model2013-04-07
SOT360-1plastic, thin shrink small outline package; 20 leads; 0.65 mm pitch; 6.5 mm x 4.4 mm x 1.1 mm bodyOutline drawing2018-10-18
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT360-1_118TSSOP20; Reel pack for SMD, 13''; Q1/T1 product orientationPacking2020-02-26
SOT163-1_118SO20; Reel pack for SMD, 13"; Q1/T1 product orientationPacking2020-02-14
SOT163-1_115Tape reel SMD; standard product orientation 12NC ending 115Packing2013-04-25
SOT163-1plastic, small outline package; 20 leads; 1.27 mm pitch; 12.8 mm x 7.5 mm x 2.65 mm bodyOutline drawing2018-10-18
SOT163-1_518SO20; Reel dry pack for SMD, 13"; Q1/T1 product orientationPacking2020-02-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
ahc374ahc374 IBIS modelIBIS model2013-04-07
ahct374ahct374 IBIS modelIBIS model2013-04-07

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.