74HC74-Q100; 74HCT74-Q100

Dual D-type flip-flop with set and reset; positive-edge trigger

The 74HC74-Q100; 74HCT74-Q100 are dual positive edge triggered D-type flip-flop with individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, will be stored in the flip-flop and appear at the nQ output. The Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
  • Input levels:
    • For 74HC74-Q100: CMOS level
    • For 74HCT74-Q100: TTL level
  • Symmetrical output impedance
  • Low power dissipation
  • High noise immunity
  • Balanced propagation delays
  • Specified in compliance with JEDEC standard no. 7A
  • ESD protection
    • MIL-STD-883, method 3015 exceeds 2000 V
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
  • Multiple package options

Target applications

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HC74BQ-Q100Production2.0 - 6.0CMOS± 5.21482low-40~12510620.974DHVQFN14
74HC74D-Q100Production2.0 - 6.0CMOS± 5.21482low-40~12510820.166SO14
74HC74PW-Q100Production2.0 - 6.0CMOS± 5.21482low-40~1251417.867TSSOP14
74HCT74BQ-Q100Production4.5 - 5.5TTL± 41559low-40~12510620.974DHVQFN14
74HCT74D-Q100Production4.5 - 5.5TTL± 41559low-40~12510820.166SO14
74HCT74PW-Q100Production4.5 - 5.5TTL± 41559low-40~1251417.867TSSOP14

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74HC74BQ-Q100
DHVQFN14
(SOT762-1)
SOT762-1Reel 7" Q1/T1ActiveHC7474HC74BQ-Q100,115
( 9352 988 79115 )
74HC74D-Q100
SO14
(SOT108-1)
SOT108-1SO-SOJ-REFLOW
SO-SOJ-WAVE
Reel 13" Q1/T1Active74HC74D74HC74D-Q100,118
( 9352 988 81118 )
74HC74PW-Q100
TSSOP14
(SOT402-1)
SOT402-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveHC7474HC74PW-Q100,118
( 9352 988 82118 )
74HCT74BQ-Q100
DHVQFN14
(SOT762-1)
SOT762-1Reel 7" Q1/T1ActiveHCT7474HCT74BQ-Q100,115
( 9352 988 83115 )
74HCT74D-Q100
SO14
(SOT108-1)
SOT108-1SO-SOJ-REFLOW
SO-SOJ-WAVE
Reel 13" Q1/T1Active74HCT74D74HCT74D-Q100,118
( 9352 988 84118 )
74HCT74PW-Q100
TSSOP14
(SOT402-1)
SOT402-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1ActiveHCT7474HCT74PW-Q100,118
( 9352 988 85118 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRMSLMSL leadfree
74HC74BQ-Q10074HC74BQ-Q100,11574HC74BQ-Q100Always Pb-free84.911
74HC74D-Q10074HC74D-Q100,11874HC74D-Q100Always Pb-free84.911
74HC74PW-Q10074HC74PW-Q100,11874HC74PW-Q100Always Pb-free84.911
74HCT74BQ-Q10074HCT74BQ-Q100,11574HCT74BQ-Q100Always Pb-free84.911
74HCT74D-Q10074HCT74D-Q100,11874HCT74D-Q100Always Pb-free84.911
74HCT74PW-Q10074HCT74PW-Q100,11874HCT74PW-Q100Always Pb-free84.911
Quality and reliability disclaimer

Documentation (17)

File nameTitleTypeDate
74HC_HCT74_Q100Dual D-type flip-flop with set and reset; positive edge-triggerData sheet2017-03-30
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
hchc Spice modelSPICE model2013-05-06
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SOT762-1_471DHVQFN14; Reel sulfur barrier pack, SMD, 7" Q1/T1 standard product orientation Orderable part number ending ,471 or Z Ordering code (12NC) ending 471Packing2016-01-21
SOT762-1plastic, leadless dual in-line compatible thermal enhanced very thin quad flat package; 14 terminals; 0.5 mm pitch; 3 mm x 2.5 mm x 1 mm bodyOutline drawing2018-11-14
SOT762-1_115DHVQFN14; Reel pack for SMD, 7"; Q1/T1 product orientationPacking2020-02-13
SOT402-1_623TSSOP14; Reel pack; SMD, 13"; Q1 Standard product orientation; Orderable part number ending, 623 or XP; Ordering code (12NC) ending 623Packing2013-05-15
SOT402-1_653TSSOP14; Reel pack; SMD, 13"; Q1 Standard product orientation; Orderable part number ending, 653 or HL; Ordering code (12NC) ending 653Packing2013-05-15
SOT402-1plastic, thin shrink small outline package; 14 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm bodyOutline drawing2018-10-18
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT402-1_118TSSOP14; Reel pack for SMD, 13"; Q1/T1 product orientationPacking2019-11-29
SOT108-1_431SO14; Reel sulfur barrier pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending ,431 or Z Ordering code (12NC) ending 431Packing2016-11-24
SOT108-1plastic, small outline package; 14 leads; 1.27 mm pitch; 8.65 mm x 3.9 mm x 1.75 mm bodyOutline drawing2018-10-18
SO-SOJ-REFLOWFootprint for reflow solderingReflow soldering2009-10-08
SO-SOJ-WAVEFootprint for wave solderingWave soldering2009-10-08
SOT108-1_118SO14; Reel pack for SMD, 13"; Q1/T1 product orientationPacking2020-02-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
hchc Spice modelSPICE model2013-05-06

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.