74AUP1G158

Low-power 2-input multiplexer; inverting

The 74AUP1G158 is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the complement (inverted) form.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V.

This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

Features

  • Wide supply voltage range from 0.8 V to 3.6 V
  • High noise immunity
  • Complies with JEDEC standards:
    • JESD8-12 (0.8 V to 1.3 V)
    • JESD8-11 (0.9 V to 1.65 V)
    • JESD8-7 (1.2 V to 1.95 V)
    • JESD8-5 (1.8 V to 2.7 V)
    • JESD8-B (2.7 V to 3.6 V)
  • ESD protection:
    • HBM JESD22-A114F Class 3A exceeds 5000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Low static power consumption; ICC = 0.9 μA (maximum)
  • Latch-up performance exceeds 100 mA per JESD 78 Class II
  • Inputs accept voltages up to 3.6 V
  • Low noise overshoot and undershoot < 10 % of VCC
  • IOFF circuitry provides partial Power-down mode operation
  • Multiple package options
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AUP1G158GMProduction1.1 - 3.6CMOS1.9 / -1.93.2ultra low-40~1252906.5145XSON6
74AUP1G158GNProduction1.1 - 3.6CMOS1.9 / -1.93.2ultra low-40~12527511.7171XSON6
74AUP1G158GSProduction1.1 - 3.6CMOS1.9 / -1.93.2ultra low-40~12527214.8177XSON6
74AUP1G158GWProduction1.1 - 3.6CMOS1.9 / -1.93.2ultra low-40~12526438.6153TSSOP6

Package

Type numberPackageOutline versionReflow-/Wave solderingPackingStatusMarkingOrderable part number, (Ordering code (12NC))
74AUP1G158GM
XSON6
(SOT886)
SOT886Reel 7" Q1/T1, Q3/T4ActiveaU74AUP1G158GM,132
( 9352 799 73132 )
Reel 7" Q1/T1ActiveaU74AUP1G158GM,115
( 9352 799 73115 )
74AUP1G158GN
XSON6
(SOT1115)
SOT1115Reel 7" Q1/T1, Q3/T4ActiveaU74AUP1G158GN,132
( 9352 917 27132 )
74AUP1G158GS
XSON6
(SOT1202)
SOT1202Reel 7" Q1/T1, Q3/T4ActiveaU74AUP1G158GS,132
( 9352 928 52132 )
74AUP1G158GW
TSSOP6
(SOT363)
SOT363Reel 7" Q3/T4, ReverseActiveaU74AUP1G158GW,125
( 9352 799 72125 )

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFRMTBF (hour)MSLMSL leadfree
74AUP1G158GM74AUP1G158GM,13274AUP1G158GMAlways Pb-free0.03.293.04E811
74AUP1G158GM74AUP1G158GM,11574AUP1G158GMAlways Pb-free0.03.293.04E811
74AUP1G158GN74AUP1G158GN,13274AUP1G158GNAlways Pb-free11
74AUP1G158GS74AUP1G158GS,13274AUP1G158GSAlways Pb-free11
74AUP1G158GW74AUP1G158GW,12574AUP1G158GWAlways Pb-free0.03.293.04E811
Quality and reliability disclaimer

Documentation (22)

File nameTitleTypeDate
74AUP1G158Low-power 2-input multiplexer; invertingData sheet2017-05-03
AN10161PicoGate Logic footprintsApplication note2002-10-29
AN11052Pin FMEA for AUP familyApplication note2019-01-09
aup1g158aup1g158 IBIS modelIBIS model2014-12-21
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Leaflet2019-04-12
Nexperia_Selection_guide_2020Nexperia Selection Guide 2020Selection guide2020-01-31
SOT1202_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-01-13
MAR_SOT1202MAR_SOT1202 TopmarkTop marking2013-06-03
SOT1202plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1mm x 0.35 mm bodyOutline drawing2018-11-14
SOT1115_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-02-14
MAR_SOT1115MAR_SOT1115 TopmarkTop marking2013-06-03
SOT1115plastic, leadless extremely thin small outline package; 6 terminals; 0.3 mm pitch; 0.9 mm x 1 mm x 0.35 mm bodyOutline drawing2018-11-14
SOT363_165TSSOP6; reel pack; reversed product orientation; 12NC ending 165Packing2012-11-20
SOT363_135TSSOP6; Tape reel SMD; standard product orientation 12NC ending 135Packing2012-11-20
MAR_SOT363MAR_SOT363 TopmarkTop marking2013-06-03
SOT363_115TSSOP6; Tape reel SMD; standard product orientation 12NC ending 115Packing2012-11-15
SOT363plastic, surface-mounted package; 6 leads; 0.65 mm pitch; 2.1 mm x 1.25 mm x 0.95 mm bodyOutline drawing2018-11-14
SOT363_125TSSOP6 ; Reel pack for SMD, 7"; Q3/T4 product orientationPacking2020-02-14
SOT886_115XSON6; Reel pack for SMD, 7''; Q1/T1 product orientationPacking2020-02-13
SOT886_132XSON6; Reel pack for SMD, 7''; Q3/T4 product orientationPacking2020-02-13
MAR_SOT886MAR_SOT886 TopmarkTop marking2013-06-03
SOT886plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 mm bodyOutline drawing2018-11-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
aup1g158aup1g158 IBIS modelIBIS model2014-12-21

Ordering, pricing & availability

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.